According to the specs from WBGO that you posted, the 10th chassis vin # position for your 1995 chassis should be an "S". Your CHASSIS model number should be P32132, because the specs say the COACH model # WCM33RQ comes on a 228" wheel base ("321" is the code for 228" WB). However, your specs show the CHASSIS model number is P32032, which means GM built it with a 208" wheel base.
This seemingly contradictory info is actually quite simple to explain, because WBGO, and many other coach builders, often bought bare chassis with the shortest wheel base they needed for some models and then CUT and EXTENDED the chassis frame rails to make whatever longer wheel base length was needed for other model floor plans. Assuming this was done to yours, you should be able to see where the cut was made and weld-reinforced splices were added.
Not sure this info will help you find the correct length drag link, or not, but hoping it may help. Ed
Great info, Thank you. S is on my vin and it is 228 Wheel base, Cant see no splices in it . My frame could be older for all I know. And that cut sheet could be a generic speck sheet it was a copier printout sheet.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!