I will attach copy to change some proceedures:
The attached is a PDF of the installation. Since this was done 2 years ago I have made one revision regarding the glue. I have since used 3M spray glue #77 and have found it works very well. Mask out what ever you do not want glue on. I would anchor my 4’ x 8’ piece of fabric to the ceiling 2 feet from the end I am going to glue. Start by allowing 1/2” to fit under wall trim, center side to side, have helper place a 3 to 4’ piece of 1/4” plywood 2 feet back from wall and brace with 2 poles like in photo. Spray glue on ceiling and on fabric. Using a 12 inch drywall knife, smooth fabric evenly to, and under wall trim. Move plywood to location where fabric is already glued. Using a felt pen make a light “Dot” about 2 feet from where glue ends on ceiling and on back of fabric. Spray both surfaces and smooth out. Repeat -- to opposite wall.
|