Quote:
Originally Posted by golfpgb
I bought my 26" wiper blades on clearance at Walmart for 2.00 each.
I ordered the adapter kits from Camping World for 6.00 and went to the local ACE hardware store and purchased four 6MM bolts and nuts to fasten them on to the Ford wiper arm.
Works well, now I can buy any wiper arm and replace them very easily and less cost.
|
Quote:
Originally Posted by harleyjt
Can you tell me how the adapters work? My wiper arm has a through bolt with a nut that runs through holes in the blade. Do the adapters you got from CW adapt a blade to fit an arm with a through bolt? It looks like maybe you have to drill a couple of holes in the new wiper blade so the adapter will screw onto it? Trying to understand how your setup works.
Thanks!
jt
|
If your wiper blades are bolted to the arms, the wiper system was probably made by Denso. I have the same bolt on blades. I buy any blade and remove the swivel part that the arm normally attaches to. The 6MM bolt fits perfect without an adapter.
__________________
1999 35 ft. Dolphin 5350, F53, Banks System, 5 Stars Tune, Air Lift Air Bags, Koni Shocks, Blue OX TruCenter, TigerTrak track bars F&R, Roadmaster 1-3/4" rear auxiliary sway bar, 2004 F450 Lariat Pickup 6.0 Diesel Crew Cab DRW, 4X4, GVWR 15,000, Front GAWR 6,000, Rear GAWR 11,000, GCWR 26,000,1994 36ft Avion 5er, GVWR 13,700, 2,740 Pin Weight.
|