 |
10-25-2013, 07:12 PM
|
#1
|
|
Senior Member
Evergreen Owners Club
Join Date: Nov 2012
Location: W palm beach ,Fl
Posts: 642
|
Warning beep when in neutral ??
just started , it seem's like when I go from drive to nutrual and pull the parking brake and leave it on I get a warning beep , if I put my foot on the brake the beep stop's , also I can turn brake on and off a few time's and it will get rid of the beeb so I can leave it in park
any idea ?
I think it could be a bad sensor
Thank you
mike
__________________
Mike , Fre & daughter Kimberly , 2 dog's name Marly & Zorra , 2014 Palazzo 33.3 , Jetta TDI & Acme tow dolly ,Goodsams, Koa , Still learning 
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
10-25-2013, 07:41 PM
|
#2
|
|
Senior Member
Monaco Owners Club
Join Date: Apr 2009
Location: Granbury, Texas
Posts: 1,394
|
It could be the parking brake "switch". I had one go out on our coach. I do not remember if it alarmed or not but ours was leaking air so I knew it was bad!
|
|
|
|
|
10-28-2013, 10:22 AM
|
#3
|
|
Senior Member
Freightliner Owners Club
Join Date: Aug 2005
Location: Chicagoland
Posts: 715
|
X2,it's the parking brake switch.
Siggy
__________________
Siggy & Ursula.
2011 Newmar DSDP 4020 , (No DEF, 07 emission),
FTL XCR Chassis , Cummins ISL 400 HP
|
|
|
|
|
10-30-2013, 05:59 PM
|
#4
|
|
Senior Member
Monaco Owners Club
Join Date: Jul 2009
Location: Mo
Posts: 270
|
Mine does that and I discovered that if I reach behind the parking brake switch and "wiggle" the two wires it stops beeping. It also would not allow me to put the jacks down until I do the same thing. I'll be checking this weekend to see if those wires can be tightened or if I need a new switch.
__________________
Jim and Carol
2005 Monaco Windsor
2010 RAM 1500 Quad Cab 4x4
|
|
|
|
|
10-30-2013, 06:01 PM
|
#5
|
|
Senior Member
Evergreen Owners Club
Join Date: Nov 2012
Location: W palm beach ,Fl
Posts: 642
|
thank you
__________________
Mike , Fre & daughter Kimberly , 2 dog's name Marly & Zorra , 2014 Palazzo 33.3 , Jetta TDI & Acme tow dolly ,Goodsams, Koa , Still learning
|
|
|
|
|
10-31-2013, 04:30 PM
|
#6
|
|
Senior Member
Monaco Owners Club
Join Date: Jul 2009
Location: Mo
Posts: 270
|
Today I took the yellow parking brake assembly loose and in looking at the terminals where the wires make contact I saw they were corroded to the extent that it was hard to make contact.
I sprayed with contact cleaner but that doesn't remove the corrosion. I got my Dremel tool and used a very small wire brush attachment and cleaned all the corrosion off both parts that needed to make a good contact.
Works like it was supposed to now.
__________________
Jim and Carol
2005 Monaco Windsor
2010 RAM 1500 Quad Cab 4x4
|
|
|
|
|
11-14-2013, 12:36 PM
|
#7
|
|
Senior Member
Join Date: Dec 2010
Location: Tuckerton, NJ
Posts: 164
|
When the parking brake is applied and you put the transmission in drive or reverse you will get a beep. If the parking brake is released, and you put the transmission in neutral, you will get a beep then also.
__________________
2005 Itasca Horizon 40FD
FMCA 428291
|
|
|
|
|
11-25-2013, 11:34 PM
|
#8
|
|
Junior Member
Join Date: Oct 2011
Location: Atlanta, Ga
Posts: 14
|
I get a beep when I release the air brake and put the transmission in drive, it will beep going down the road until I reach point b and apply the brake. No lights are on and the jacks are up.
2001 Georgie Boy
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
