|
|
09-29-2014, 08:37 PM
|
#1
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
XCM Chassis electric brake controller
This is the plug I found behind the steering wheel finally:
There is no "Blue" wire.
2013 FleetWood Expedition 38B
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
09-30-2014, 09:43 AM
|
#2
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
Here is another picture:
Is this the correct pigtail/plug for an electric trailer brake controller?
2013 FleetWood Expedition 38B
|
|
|
10-01-2014, 12:32 PM
|
#3
|
Senior Member
Newmar Owners Club
Join Date: Jul 2007
Location: Troy, MI
Posts: 637
|
Yes it is. The brake controller wiring circuits are as follows (Source: Freightliner Tech Support and confirmed on Freightliner schematic):
Circuit 36G = Brake Light Signal (activated by brake pedal NOT exhaust brake), Red with White tracer, 18ga
Circuit 36T = Trailer Signal (this is Freightliner's terminology, although this is the outbound power lead TO the trailer brakes), Red with White tracer (yes it IS the same color code), 12ga wire (that's how you tell 'em apart)
Circuit 29A = Illumination light (if controller has backlighting), Brown
Circuit 14T = +12v supply to controller, Red (this is a 12ga wire)
Circuit (not numbered) = Ground, Black
Packard Connector p/n (for Freightliner use) PAC 12064754
Packard Terminal p/n (for Freightliner use) PAC 12129498
__________________
Andy
2015 DSDP 4369 with HWH Active Air, 2014 Jeep Grand Cherokee, Roadmaster tow bar, SMI AirForce One, Silverleaf VMSPc
|
|
|
10-02-2014, 11:34 AM
|
#4
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
Andyh,
Thank you so very much! Why is it so hard to find this info, rhetorical question? I owe you a meal and drinks if we ever run into one another.
Walt B
2013 FleetWood Expedition 38B
|
|
|
10-02-2014, 01:33 PM
|
#5
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
And, I found the pieces to build the connector on Amazon. I just love this place. Now to order the brake controller.
2013 FleetWood Expedition 38B
|
|
|
10-06-2014, 11:22 AM
|
#6
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
Got the pins Saturday and the Tekonsha P3 brake controller today. Time to get the soldering iron out. Waiting for the male plug.
2013 FleetWood Expedition 38B
|
|
|
10-06-2014, 12:53 PM
|
#7
|
Senior Member
Newmar Owners Club
Join Date: Jul 2007
Location: Troy, MI
Posts: 637
|
Walt,
I am glad I could help.
__________________
Andy
2015 DSDP 4369 with HWH Active Air, 2014 Jeep Grand Cherokee, Roadmaster tow bar, SMI AirForce One, Silverleaf VMSPc
|
|
|
10-07-2014, 10:50 AM
|
#8
|
Senior Member
Join Date: Sep 2010
Location: MI
Posts: 1,094
|
BTW, if anyone needs the male pin plug, I have 50 of them now. Only way I could find them in a timely fashion. 50¢ each plus postage.
2013 FleetWood Expedition 38B
|
|
|
10-16-2014, 07:32 AM
|
#9
|
Senior Member
Monaco Owners Club
Join Date: Sep 2013
Posts: 2,497
|
I have been wanting to add a brake controller. Are the 2003 Freightliner chassis trailer connectors the same as the 2013 models? If so I would like to get a plug.
__________________
2014 Newell 2020P 45'8" ISX 600 HP
|
|
|
10-17-2014, 09:19 PM
|
#10
|
Junior Member
Join Date: Oct 2014
Location: pomfret center ct
Posts: 5
|
I just purchased a 03 expedition on a freightliner chassis manufactured 10-02. I was given a part number from Fleetwood for a connector, $133.00, which I got from Freightliner. I have now found that Freightliner did not start prewiring for a brake controller till 04. Anybody need a plug, free if you can use it. Looking for anyone that knows if the trailer power wire from the trailer plug is routed to the front and where does it come out.
|
|
|
03-10-2015, 08:25 AM
|
#11
|
Junior Member
Join Date: Jun 2009
Posts: 21
|
Connector
Quote:
Originally Posted by hypoxia
I have been wanting to add a brake controller. Are the 2003 Freightliner chassis trailer connectors the same as the 2013 models? If so I would like to get a plug.
|
Just ordered connector and terminals from Mouser no minimum 1.23 for connector and .23 for terminals (bought extra in case I mess up). Mouser # is 800-346-6873 Connector part # pac 12064754-Terminal # pac 12129498. Hope this helps someone out. My coach is a 2007 Fleetwood Excursion
|
|
|
03-19-2015, 12:24 AM
|
#12
|
Junior Member
Join Date: Feb 2015
Posts: 28
|
Quote:
Originally Posted by jshea
I just purchased a 03 expedition on a freightliner chassis manufactured 10-02. I was given a part number from Fleetwood for a connector, $133.00, which I got from Freightliner. I have now found that Freightliner did not start prewiring for a brake controller till 04. Anybody need a plug, free if you can use it. Looking for anyone that knows if the trailer power wire from the trailer plug is routed to the front and where does it come out.
|
I could use the plug if you still have it. Let me know? Thanks Dave
|
|
|
03-19-2015, 12:43 AM
|
#13
|
Junior Member
Join Date: Feb 2015
Posts: 28
|
Quote:
Originally Posted by michaelsnewt
Just ordered connector and terminals from Mouser no minimum 1.23 for connector and .23 for terminals (bought extra in case I mess up). Mouser # is 800-346-6873 Connector part # pac 12064754-Terminal # pac 12129498. Hope this helps someone out. My coach is a 2007 Fleetwood Excursion
|
So I have a 2006 Expedition and am guessing this is the same Connector and terminals I will need? How many of each. I will need to Connector for the Prodigy brake controller and also coach connector correct? Does the same connector work on both? And what about terminals?
Thanks for help
|
|
|
03-20-2015, 06:07 AM
|
#14
|
Junior Member
Join Date: Jun 2009
Posts: 21
|
Brake connector
Quote:
Originally Posted by RocDog
So I have a 2006 Expedition and am guessing this is the same Connector and terminals I will need? How many of each. I will need to Connector for the Prodigy brake controller and also coach connector correct? Does the same connector work on both? And what about terminals?
Thanks for help
|
you will need 1 connector (male) It's a 6 hole connector you will only use 4. 4 terminals. female connector should be located down around steering column. connectors are marked A B C D E F for each hole. For my prodigy 2 brake controller wires you connect as follow- cavity A red wire. cavity C blue wire. cavity D black wire. cavity E white wire. You do not use cavity B or F. So much easier then hard wiring!
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|