Community Forums

Kimberlyd28 · 03-20-2016, 03:44 PM

I have a slide that did not work this morning. It is a bedroom slide, 1 slide works in the bedroom. there was no power to the switch but the two slides share a fuse so fuse is good.
When we put slide out earlier in the week it didn't appear to be a problem.

Any one had this problem?

Todd

Sirmowsalot · 03-20-2016, 04:39 PM

Todd, I have a 2007 T/S so mine might be alittle different .In front of the Driver front tire there is a panel door inside there are 4 controllers I had to switch controllers to make mine work when I got home a purchased new controller Hope this helps Pete

rag_ftw · 03-20-2016, 06:53 PM

Check this conversation for possible help.
http://www.irv2.com/forums/f274/back...de-281845.html

If this doesn't help come back to us and we will try something else.
If you find a fix please post so others can benefit from your troubleshooting.

sailor_lou · 03-21-2016, 08:21 AM

Todd,

Are you sure both slides share a common fuse? I know on my rig each slide controller is fuse separately, which is logical and consistent with most of what TS did. Good luck.

Kimberlyd28 · 03-21-2016, 07:35 PM

I will check it out, it is very possible I am wrong!

If this doesn't help come back to us and we will try something else.
If you find a fix please post so others can benefit from your troubleshooting.[/QUOTE]

wernie1 · 03-21-2016, 10:26 PM

i have a 2003 45 tag , i had the same problem look in the compartment with the inverters you will find slide controllers and fuses there hope it helps

edyktz · 03-23-2016, 05:54 PM

I had same problem last week, It was a fuse in the inverter compartment. Each slide has it's own fuse.

Kimberlyd28 · 03-23-2016, 07:17 PM

I found the lose wire, thanks for the help

rag_ftw · 03-23-2016, 08:09 PM

Quote:

Originally Posted by Kimberlyd28

I found the lose wire, thanks for the help

Where was the loose wire?

Kimberlyd28 · 03-23-2016, 08:13 PM

On the slide controller one of the two black power wires had come lose

rag_ftw · 03-24-2016, 09:34 AM

You have to love it when good troubleshooting procedures pay off with a fix that is free! Good job in troubleshooting and not just throwing new parts at the problem!