We were told during PJ's course that the setting of 5 = 85 degrees at the temp sensor located 8 inches off the floor. Not sure if we are remembering this correctly or not, but it is what we wrote down in our notes.
What we do remember correctly is that each number = a 3 degree difference, so 4 would be 82, 3 = 79 and so on.
We do know that we were roasting in the coach at a floor setting of 1 and front setting of 62 degrees. At these settings the front actually got up to around 88 degrees. Service at Middlebury checked the coach and said that they found the hose kinked at the circulation boast pump was kinked and that they fixed this.
We still find the heat in the coach is a moving target and typically way to hot and not corresponding to the temps that are set on the VegaTouch panel.
Entegra would do well to publish a white paper on the use and settings of the Aquahot system for the 17's.
Quote:
Originally Posted by bill2011
So we now can choose a setting of 1, 2, 3, or 4. I know I heard that these settings equate to a desired room temperature range but I can't find this information and consequently don't know what setting we should use. Does anybody have that information?
|