Quote:
Originally Posted by cronauerdj
I got a question for the group I have a 2024 Anthem 44d
is any one having problem with the rubber seal around the glass on the shower. I have put it back in place 3 or 4 times already.
It seems to me the corner pice is so thin and moves so much it lets the seal come out of place. This is picture of corner. Anyone else have this problem? Is there a fix?
Dale
|
If it’s the big piece of glass you’re talking about yes there’s a fix, at least on mine. Problem is when the factory puts the large piece of glass in they slide it all the way against the outside wall which leaves very little glass in the other track. Way to fix it is pull all the seal out, take off the top track and then center the glass. Reinstall the top track, rubber seal and silicone the inside and you shouldn’t have any further problems.
The factory even put the rubber seal on the inside of my shower glass, along with a couple of other things, which required me to completely disassemble it and fix it correctly.
Linear Mode
