RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Entegra Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-26-2019, 04:03 PM   #1
Senior Member
 
GreggBuda's Avatar
 
Join Date: Apr 2011
Posts: 102
Adjusting electric shades

I had a malfunction on one of my bedroom electric day shades as it rolled up too far and got stuck. I was told to take the valance off to “unstick” it and I was successful! However, I hit one of the micro switches and now it’s out of sync and rolls too far down and actually unspools to the other side of the roller! How do I reset the stop points using those 2 micro switches?

Thanks!

Gregg
__________________
Gregg and Jodi
2019 Cornerstone 45Y, 2017 Jeep Grand Cherokee
767 United Airlines, Boeing 747-400/ -8 UPS Airlines
GreggBuda is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-26-2019, 04:20 PM   #2
Senior Member
 
Join Date: May 2017
Posts: 2,498
Quote:
Originally Posted by GreggBuda View Post
I had a malfunction on one of my bedroom electric day shades as it rolled up too far and got stuck. I was told to take the valance off to “unstick” it and I was successful! However, I hit one of the micro switches and now it’s out of sync and rolls too far down and actually unspools to the other side of the roller! How do I reset the stop points using those 2 micro switches?

Thanks!

Gregg
That was me with removing valance.
As far as adjusting shades: hold the down micro switch while someone holds the down arrow on Vega touch. The shade will go down a few inches stop and beep. Release the Vega touch and programming switch. Go to the Vega touch and run shade down to almost where you want it, then each time you tap the Vega touch it’ll go down 1/4 in or so. When it gets to where you want it hit the up on Vega touch until it gets almost up to where you want it. Once again each tap up is about 1/4 in. When it gets to where you want it go back to down on Vega touch and it will be programmed
__________________
J.H. 2020 45W Cornerstone
2020 Ram Limited eco diesel
Rollin101 is offline   Reply With Quote
Old 07-29-2019, 11:06 AM   #3
Senior Member
 
Join Date: May 2017
Posts: 2,498
Quote:
Originally Posted by GreggBuda View Post
I had a malfunction on one of my bedroom electric day shades as it rolled up too far and got stuck. I was told to take the valance off to “unstick” it and I was successful! However, I hit one of the micro switches and now it’s out of sync and rolls too far down and actually unspools to the other side of the roller! How do I reset the stop points using those 2 micro switches?

Thanks!

Gregg
Did you get your shade programmed?
__________________
J.H. 2020 45W Cornerstone
2020 Ram Limited eco diesel
Rollin101 is offline   Reply With Quote
Old 07-29-2019, 11:04 PM   #4
Senior Member
 
B-Man49's Avatar
 
Entegra Owners Club
Spartan Chassis
Join Date: Mar 2015
Posts: 186
Here you go.
Attached Files
File Type: pdf MCD Motorized Set Limits.pdf.pdf (32.3 KB, 23 views)
__________________
Bryan & Charlene "Furry Kid Tucker"
2020 Entegra Anthem 44W Tango
2018 Entegra Anthem 44A (Totaled due to flash flood)
B-Man49 is offline   Reply With Quote
Old 07-30-2019, 10:51 AM   #5
Senior Member
 
GreggBuda's Avatar
 
Join Date: Apr 2011
Posts: 102
Quote:
Originally Posted by Rollin101 View Post
Did you get your shade programmed?
Haven't yet but will be working on it when I have the rig up at Spartan the next couple of days! Thanks for the guidance!

Gregg
__________________
Gregg and Jodi
2019 Cornerstone 45Y, 2017 Jeep Grand Cherokee
767 United Airlines, Boeing 747-400/ -8 UPS Airlines
GreggBuda is offline   Reply With Quote
Reply

Tags
electric



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjusting Manual Window Shades? reubenray Newmar Owner's Forum 4 05-26-2019 11:26 AM
MCD shades vs Auto Motion Shades z32k12 MH-General Discussions & Problems 22 12-05-2017 09:52 PM
Adjusting front shades OldHiker Newmar Owner's Forum 2 05-14-2016 02:43 PM
Night Shades (on Day/Night shades) pleat problem Matt NY MH-General Discussions & Problems 11 12-15-2015 05:49 PM
Adjusting Day - Night Shades jadtif Tiffin Owner's Forum 8 12-14-2010 12:52 PM


All times are GMT -6. The time now is 09:57 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.