Quote:
Originally Posted by bill2011
In reviewing 757 Drivers comments regarding the battery type setting for Discover batteries not necessarily being the optimal setting I decided to check with Lifeline to see if a similar situation might exist for the those of us using the Lifeline GPL-4CT's. The customer service rep at Lifeline tells me they spent a lot of time with Magnum developing those settings and I should go with the AGM 1 setting and not custom program. Keep in mind that this is just for Lifeline.
I also asked him about the Genset Command 30 setting for voltage cut out (Stop @ V). Based on the range available of 13.2-14.5 (page 9 of my Energy Command 30 manual) he told me to go with 14.5. I don't know what the default 3 bar setting in the Energy Command 30 would equate to so I am figuring I should change to 14.5. Any thoughts?
|
Bill, did you happen to ask if the Start @ voltage setting at 11.7 was ok?
Good info, just changed my stop voltage to 14.5 from auto. Thanks!