Quote:
Originally Posted by Wineman
What size air hose, 1/4 or 3/8 , does most everyone have? I have 3/8 and when I went to Loews to get fittings they had mostly 1/4 inch. Want to make that setup for filling tires with the gauge built in but what wasn't sure if I stepped down to 1/4 if it would it take that much longer to fill. Does it really make a difference?
|
George, the fitting are all standard size. There is an extra fitting wire tied to your air connection on the Anthem. Take that in the store with you and match it up. 1/4 IN thread is the standard thread for all air hoses. If you get up towards Harbor Freight, it's on 41 and College Pkwy. you can get a set of six air fittings for what one cost a Lowe's, if not, it's not worth the gas.
I use 1/4 in hose on the MH as I don't need the volume to run air tools, just air up my tires. At home I use 3/8 for all of my air tools that need higher volume.