|
06-02-2020, 04:10 PM
|
#1
|
Member
Join Date: Aug 2017
Location: Naples
Posts: 88
|
Airbags won’t inflate
I went out today to get ready for a trip to get hydra lift installed but can’t get the airbags to inflate.
The air pressure is good but the coach is sitting flat.
I can’t get under it to check the bag valves. Also all 10 bags are down.
Any ideas?
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
06-02-2020, 04:47 PM
|
#2
|
Member
Join Date: May 2017
Posts: 98
|
One thing to check, that the hydraulic jacks are all the way up, they lock out there airbags when down. Lower them a bit, then raise fully, then turn off their power switch.
|
|
|
06-02-2020, 05:04 PM
|
#3
|
Registered User
Join Date: May 2017
Posts: 2,582
|
Quote:
Originally Posted by Fishpcb
I went out today to get ready for a trip to get hydra lift installed but can’t get the airbags to inflate.
The air pressure is good but the coach is sitting flat.
I can’t get under it to check the bag valves. Also all 10 bags are down.
Any ideas?
|
Run your jacks down with auto level. Put Mh in fast idle and retract the jacks again. My guess is it’ll air up.
Sure would help if you guys would put your year and model of Mh in your signature lines.
|
|
|
06-02-2020, 05:05 PM
|
#4
|
Member
Join Date: Aug 2017
Location: Naples
Posts: 88
|
Quote:
Originally Posted by drwaynesmith
One thing to check, that the hydraulic jacks are all the way up, they lock out there airbags when down. Lower them a bit, then raise fully, then turn off their power switch.
|
I will try that. I did just raise the jacks and that's when I noticed the problem.
Thanks
|
|
|
06-02-2020, 05:17 PM
|
#5
|
Member
Join Date: Aug 2017
Location: Naples
Posts: 88
|
For some reason I can't get the signature to stay up.
__________________
----------------------------------
2013 Entegra Anthem 42 DEQ
|
|
|
06-02-2020, 05:20 PM
|
#6
|
Member
Join Date: Aug 2017
Location: Naples
Posts: 88
|
Well I fixed the signature problem, now to fix the airbag problem.
__________________
----------------------------------
2013 Entegra Anthem 42 DEQ
|
|
|
06-03-2020, 05:33 AM
|
#7
|
Senior Member
Join Date: Nov 2014
Location: Niceville, Florida
Posts: 773
|
What pressures are you seeing on the dash gauges?
__________________
2012 Entegra Aspire RBQ
2009 Chevy Z71 Tahoe Four Down
2019 GMC Sierra 1500 Four Down
|
|
|
06-03-2020, 07:52 AM
|
#8
|
Member
Join Date: Aug 2017
Location: Naples
Posts: 88
|
I got the bags to air up.
I had to lower and raise the auto level a couple of times then it started working.
It had been sitting and needed working to get it going.
__________________
----------------------------------
2013 Entegra Anthem 42 DEQ
|
|
|
06-03-2020, 08:25 AM
|
#9
|
Registered User
Join Date: May 2017
Posts: 2,582
|
Quote:
Originally Posted by fishpcb
i got the bags to air up.
I had to lower and raise the auto level a couple of times then it started working.
It had been sitting and needed working to get it going.
|
👍👍👍
|
|
|
06-03-2020, 08:28 AM
|
#10
|
Registered User
Join Date: May 2017
Posts: 2,582
|
Quote:
Originally Posted by Fishpcb
I got the bags to air up.
I had to lower and raise the auto level a couple of times then it started working.
It had been sitting and needed working to get it going.
|
👍👍👍
I’m sure you probably do this already, but always make sure you have good air pressure and engine in high idle before retracting the jacks which activates the valve to air up.
|
|
|
06-03-2020, 08:33 AM
|
#11
|
Senior Member
Join Date: Nov 2014
Location: Niceville, Florida
Posts: 773
|
I spent a lot of time chasing same recurring issue on my 2012. Final fix ended up being replacing the air governor.
__________________
2012 Entegra Aspire RBQ
2009 Chevy Z71 Tahoe Four Down
2019 GMC Sierra 1500 Four Down
|
|
|
06-03-2020, 10:45 AM
|
#12
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,719
|
I have had that several times, especially if sitting for a long time in storage. The dump valve sticks in the open position. Pushing the "all retract" button again, usually closes the valve allowing it to air up. Every once in awhile the jacks would have to be recycled. It was more common on my 14.
On the Travel Supreme, after 10 years it did it quite often to where the valve needed to be replaced.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|