Community Forums

CoreyinWP · 05-02-2014, 12:04 PM

When using satellite radio (xm) I have set my favorite stations. Is there a way to set the radio to utilize the smart wheel to only scroll those stations? I can manually make it happen with a few key punches on the radio, but have to do that every time I turn the engine on again. The radio always defaults to all stations?

TXBart · 05-02-2014, 12:39 PM

I can't get mine to keep any stations I set.

I have a treasure hunt every time I use the smart wheel buttons!

DSL417 · 05-02-2014, 07:02 PM

Solution...set the radio on 59...best channel anyway

Saltydog44 · 05-02-2014, 07:27 PM

Quote:

Originally Posted by CoreyinWP

When using satellite radio (xm) I have set my favorite stations. Is there a way to set the radio to utilize the smart wheel to only scroll those stations? I can manually make it happen with a few key punches on the radio, but have to do that every time I turn the engine on again. The radio always defaults to all stations?

FWIW - when we set the presets on XM, they stay. Our only complaint it that if you are a bit heavy handed changing from one to another, the preset will reset to whatever you were on.

Not sure why ours is working as it should and the smart wheel buttons (Assuming I can remember which one to push for what) work as expected. Sounds like there may be some defective radios?

MRUSA14 · 05-02-2014, 08:11 PM

Mine scrolls through all the stations when I use the smartwheel, not just the preset stations.

CoreyinWP · 05-02-2014, 08:13 PM

Yes, mine too. You can change it to only your presets to scroll with smart wheel. I was wondering if there was a way to hold those settings as the default.

beengood · 05-03-2014, 07:20 AM

I have a xm subscription and the radio displays no signal then after a while it will start working for about 5 or ten min. then quit and display no signal. Anyone else have this problem?

MRUSA14 · 05-03-2014, 07:28 AM

Quote:

Originally Posted by CoreyinWP

Yes, mine too. You can change it to only your presets to scroll with smart wheel. I was wondering if there was a way to hold those settings as the default.

Corey how do you change it to scroll only the presets?

brobox · 05-03-2014, 07:34 AM

Quote:

Originally Posted by beengood

I have a xm subscription and the radio displays no signal then after a while it will start working for about 5 or ten min. then quit and display no signal. Anyone else have this problem?

I have seen several others post that and it was caulking on the XM antenna. Peeled the caulking off and everything worked fine. Apparently it doesn't take much to knock the antenna out.

Nowabeachbum · 05-03-2014, 07:40 AM

Quote:

Originally Posted by beengood

I have a xm subscription and the radio displays no signal then after a while it will start working for about 5 or ten min. then quit and display no signal. Anyone else have this problem?

I had the same issue. Entegra ended up installing a new antenna. As Brobox said I would first check your current antenna to make sure it is well mounted.