With several of the docking lights on my ’18 Anthem clouded (one has water intrusion), I was excited to see this thread. The image posted in the OP’s first post, although clearly stating “Anthem
Classic Docking Light” looked to be an exact match for the docking lights on my ’18 Anthem. When I saw that T_Roy had found them back in stock, I ordered one.
Unfortunately, although it’s close, there’s enough difference that it won’t work. The OEM lens on my ’18 measures 8 15/16” X 4 1/4”. The replacement lens cover referred to in this thread measures 7 3/8” X 3 15/16”. Further the replacement lens cover does not have the “innovative ‘Eyebrow Accent’. Bottom line, for my ’18 Anthem, anyway, is that the lens cover listed in this thread won’t fit.
Perhaps it will fit on a “Classic”. I just don’t know. IF you’d like to try it, drop me a PM with your mailing info and a commitment to cover the shipping cost and I’ll have it on the way. OBTW, the docking lights and the lens covers have a distinct left and right; my lens cover is for the right (passenger) side. The difference between the left and right, as far as I can tell, is that the set screw to hold the stainless cover in place is on the bottom when correctly installed. If you install it on the ‘wrong’ side, that set screw will be on the top of the light fixture. The one I have to offer is designed for the Left side.
The exact OEM replacement complete assembly (L/R pair) for my '18 Anthem is available here:
https://www.itc-us.com/marine/side-m...-back-up-light for $121.28 + $18.99 to ship. It’s
not listed in their on-line catalogue, so you might email:
support@itcshopnow.com Mollie will get the process started.
Take care,
Stu
Parts ordered.
Linear Mode
