Community Forums

brobox · 11-07-2015, 06:53 AM

Here ya go. https://www.superbrightleds.com/more...-10-leds/2027/

Having been all over the underside of my MH installing the frame mounted LED lights, I know how hard it is to work in the wheel wells. When I read some of the other posts regarding reaching the Spartan plug in the wheel well, that made up my mind to string a wire down the frame from the front turn signal and tap into that for each new light to be added as well as connecting the factory mounted lights.

It's easy to fish a wire through the wheel wells with a 24 in flexible tool grabber, (a dollar at Harbor Freight) but finding the Spartan plug, not so easy.

Gasman 2 · 11-07-2015, 07:17 AM

Thanks Chuck for posting the link.😀

Cruzer · 11-07-2015, 07:30 AM

Just copy from the browser's URL line and paste it into the forum reply.

https://www.superbrightleds.com/more...-10-leds/2027/

Not quite the same frame as what Entegra uses in 2016, but close.

Gasman 2 · 11-07-2015, 07:59 AM

Quote:

Originally Posted by Cruzer

Just copy from the browser's URL line and paste it into the forum reply.

https://www.superbrightleds.com/more...-10-leds/2027/

Not quite the same frame as what Entegra uses in 2016, but close.

They are surface mount and the wires exit the center. So should be a easy replacement for the original. I'll will be researching a wiring harness that could make it plug and play.

brobox · 11-07-2015, 12:12 PM

Robert, may not be what you are looking for, but the Road Pros are plug and play into the factory harness, but not 3 wire. NEW! RoadPro - 4.75" x 1.25" Sealed Diamond Lens LED Light w/SS Base & 2-Wire Connection-Amber - rp1370ad

All of the harnesses I saw were 2 wire and came in rolls to run down the side of a semi trailers. I am sure there are 3 wire plugs avaialbe.

I found these in 3 wire if that is what you are looking for., but I don't think they match the Spartan plug. https://www.superbrightleds.com/cat/...ctors-sockets/

brobox · 11-07-2015, 01:59 PM

Please let me know if this photo of the front light placement for Gizmo worked.

The photo shows the front marker turn/signal even with the front docking light.

Gasman 2 · 11-07-2015, 02:34 PM

Quote:

Originally Posted by brobox

Please let me know if this photo of the front light placement for Gizmo worked.

The photo shows the front marker turn/signal even with the front docking light.

Sorry could not open.

brobox · 11-07-2015, 03:09 PM

Thanks Robert. I give up posting photos. What use to work will not show up on others computers, just mine. It's impossible to figure out what the problem is when I can see the photos, even in the post but nobody else can.

I am trying to post using Google Photo as the photos are automatically loaded from my phone, but it no longer works like it use to.

RubiconTrail · 12-12-2015, 11:02 AM

What is everybody using to replace their (really crappy) OEM docking lights?

EC is happy to replace the housings with the same crappy housing as you suggested, but won't upgrade to what the 15's came with because it is a bodywork issue...the existing fiberglass needs to be ground flat, filled, and re-painted for the new flushmount lights to work. The new ones, BTW also are around $100 apiece from EC, so that's $400 for just parts if they were to do it! You can find them online for about $70 apiece and do it yourself, but I'm not a body guy...yes, I'm scared!

So, I'm thinking about these: http://www.twoguystrailgear.com/productsleds.html . Scroll down to "TG-101 Stud". I think they will be a direct replacement for the EC OEM lights, but LED and much higher quality. Problem is my coach is in Indiana and I'm in California. I would like to take four of these with me when I head out to pick up the coach, but I don't know the diameter of the hole in the body. I've had them out and I know it is about an inch.

Do any of you guys know the hole diameter?

BTW, I've dealt with TG2 on lights for off road use, and they are superior quality...anodized aluminum housings, well mounted CREE's, great customer service, small enough company that they will listen to you and innovate for your usage and needs.

gizmo123316 · 12-13-2015, 12:29 PM

Regarding the docking lights: the hole is 1 3/4 inches diameter. the light base is 1 5/8 (top of threads) It is held in place with a large plastic nut. The power is a plug-in on the end. Is this enough info? Will the new ones work? I might need some too. Hope the pictures help.

Click image for larger version

Name: photo0001.jpg
Views: 107
Size: 257.1 KB
ID: 114065

Click image for larger version

Name: photo0002.jpg
Views: 108
Size: 401.9 KB
ID: 114066

Click image for larger version

Name: photo0003.jpg
Views: 92
Size: 418.6 KB
ID: 114067

RubiconTrail · 12-14-2015, 09:14 AM

Quote:

Originally Posted by gizmo123316

Regarding the docking lights: the hole is 1 3/4 inches diameter. the light base is 1 5/8 (top of threads) It is held in place with a large plastic nut. The power is a plug-in on the end. Is this enough info? Will the new ones work? I might need some too. Hope the pictures help.

Attachment 114065

Attachment 114066

Attachment 114067

That is the info I needed, the ones from TG2 will not work as their diameter is about an inch. I'll keep researching and post here if I find something. Darn, thought I had it!