Awning Center Bar
I've tried to research this issue (on these forums) but I'm still a bit unclear. I believe my problem is a rope or cord in the middle piece (contrary to what Entegra said, but no worries).
So... 2018 Aspire, Girard - Rear Awning. There is a scissor mechanism to extend the awning and, at the knuckles (where they bend in the middle) there is a bar that extends the length of the awning. This bar should remain centered, although it has to move. Mine shifts forward.
Entegra suggested there was some sort of clamp but I gather this is incorrect. It sounds like there is a rope (and spring??) mechanism to manage this. When I slide the bar forward 3-4 black strings (not rope) hang out. I gather this is a diagnostic symptom.
There are posts on tape, acquiring rope and tying knots but I don't (yet) understand the fundamental mechanism. Can Girard help with that information... is there a book or manual (or customer service)? Of course, any help here is appreciated but if it's already documented...
Thank you in advance for any help.
__________________
2018 - Entegra Aspire, NIRVC
2011 - Subaru Outback
|