Blinking control panel

[Dr. Mike]

Hi all

I just noticed one of the bedroom control panels blinking.

Any ideas on the cause or cure?

Be safe

Dr. Mike

[brobox]

If it's 12v, which it is, reboot 12v always first. If that does not fix it, plug the switch panel into the plug panel outlet in the 12v circuit breaker panel in the 1/2 bath and see if it is still doing it. If so the panel is bad.

[Motang]

Result?

[Dr. Mike]

Originally Posted by Motang

Result?

Still blinking

The panel workes perfectly except that the "panel lights" keep the pad blinking. I really think the SC roads scrambled the pads brains or loosened a wire.

Since it is not critical, I will figure it out in due time.

Of course, any ideas from the members are more than welcome.

Be safe

Dr. Mike

[brobox]

Originally Posted by Dr. Mike

Still blinking

The panel workes perfectly except that the "panel lights" keep the pad blinking. I really think the SC roads scrambled the pads brains or loosened a wire.

Since it is not critical, I will figure it out in due time.

Of course, any ideas from the members are more than welcome.

Be safe

Dr. Mike

Did you try plugging the panel into the port in the bathroom fuse panel? It should be in the lower right corner of the cabinet. Sometimes plugging it in has straightened out a glitched panel. It's another form of rebooting.