Box of many switches

[whitebear47]

This has probably been covered but I was wondering how it works. Power is never on. We have Dish. Buttons are set on TV-ANT for sat operation. For cable I push Cable-TV button. Don't know what to set it on for antenna/air. We can't get over air tv to work. This is all done with power off. I can't find instruction book if it even had one. Thanks

Michael Veit
2013 Anthem

[hayward3411]

BOMB= box of many buttons, mine has no power to box. It's just a switch box.

[sweetandsour]

Power should be on. It is an amplifier for ota signal. Then run the channel search on you tv

[hawgguy]

Originally Posted by sweetandsour

Power should be on. It is an amplifier for ota signal. Then run the channel search on you tv

What he said. Mile has power button and green LED illuminates when on.

[rag_ftw]

Originally Posted by sweetandsour

Power should be on. It is an amplifier for ota signal. Then run the channel search on you tv

Don't miss the channel search step, which could take a couple of minutes. Mine won't show ota if I don't let it search.

Here's a great search engine.
iRV2 Forums Search

[brobox]

Older MH's had a separate switch hidden somewhere for power to the over the air antenna. The Entegra BOMB gets power to the antenna with power from the BOMB. Nice part about the Entegra BOMB, you don't have to worry about turning off the hidden antenna switch to scan cable channels....just hit the button for cable it automatic. On my previous MH I use to forget that all the time! It was a pain, it was a button part of a 12v outlet.

[wa8yxm]

For OTA you need POWER ON and ANT
For DVD you need POWER ON and DVD (Save on the main v where DVD may come in on an alternative feed)

For Cable or Sat or VCR/DVR you need not have power on.