Quote:
Originally Posted by dwiede
Does anyone have any suggestions on how to access the wiring behind the front cap. Four out of five clearance lights do not work and I replaced all five.
|
More Information: My rig is a 2015 Aspire 44d. I replaced the lights using the procedure in an earlier post in iRV2.
The light fixture wire is embedded in rubber with no slack, so you must destroy the fixture and clip the wires. I cut the rubber with a fillet knife and pulled the plug out in pieces. Clipped the wires, one black and one brown.
To replace, I took 1” white rubber chair cups and sanded the flair end to a diameter that fit the hole originally covered by rubber. I then ran the new fixture wires through the cup and epoxied it to the back of the new light. Then connected the wires and siliconed the assembly back to the camper.