This is what Spartan says:
After cleaning chassis batteries I hooked up the cables and the horn started honking and wouldn't stop. After a lot of work and research Spartan said the horn is controlled by the SCM (Spartan Control Module). Spartan says you must follow this procedure to disconnect the batteries or you could damage the SCM.
Battery compartment
1, Turn off both disconnects (open)
2, Remove fuse panel cover and remove F10 (Ign. SW. 15amp fuse)
3, Remove negative battery cable, remove positive
Later...
Ray
__________________
Ray & Wendy
Full-time
2014 Anthem 42RBQ - 2018 Jeep Wrangler - FMCA F521969
|