Custom rugs for my 2014 Entegra Anthem

[dougkim87]

Is there a place to order replacement driver/passenger rugs for our 2014 Entegra Anthem? Ours are starting to look old and we would like to replace it.

[brobox]

Wades at Lazy Days in Tampa, or take yours to be used as a pattern to any carpet store that does binding.

[voltdoc]

You could try parts@entegracoach.com - provide photos and your VIN.

Most likely tho, the exact material is no longer available.

Or, check out a local carpet dealer or canvas shop who can probably find you something similar and make it for you.

We replaced ours with Shaw Successions II rubber backed commercial grade carpet. Using heavy shears we cut it into the same shape as the factory rugs. It does not need to be bound. It holds up exceptionally well, but only comes in darker colors. Any carpet dealer can order it for you.
https://www.carpet-wholesale.com/ite...ierra-sand.php

[neilnoff]

Agree with the above comments. Ours was looking terrible after 5 years, so we went to a discount carpet store and found a remnant in a darker color that still matched our interior. Gave them our original so they could use it as a template and we got two new ones (there was room for 2 on the remnant) and it was just a few hundred $$ and now we even have a spare for when this one gets too dirty to clean. Took them about 3-4 days. Good luck-

[buddy110]

Magnashade also offers custom rugs too. They are made of vinyl but you'd never know to look at them. They don't stain and clean up really easy. We installed them on our steps and in the front drivers compartment. I don't have a picture at the moment, but MS will send you a sample

[dougkim87]

Thank you all, lots of good options.

[737 Driver]

Originally Posted by neilnoff

Agree with the above comments. Ours was looking terrible after 5 years, so we went to a discount carpet store and found a remnant in a darker color that still matched our interior. Gave them our original so they could use it as a template and we got two new ones (there was room for 2 on the remnant) and it was just a few hundred $$ and now we even have a spare for when this one gets too dirty to clean. Took them about 3-4 days. Good luck-

Hi Neil,
Could you please share the name and place of the carpet store you used. We live in the same area in Spring, TX and its time for us to replace the entrance rug in our Anthem. Thank you.

Tor
2017 Anthem 44B

[neilnoff]

Originally Posted by 737 Driver

Hi Neil,
Could you please share the name and place of the carpet store you used. We live in the same area in Spring, TX and its time for us to replace the entrance rug in our Anthem. Thank you.

Tor
2017 Anthem 44B

Tor: We went to Viking/Carpet One, 21019 Spring Towne Dr, 281-355-6020 (it's off FM2920, west of I-45 by the big flea market). We worked with Melinda & Tony. The remnant was about $100 and there was enough for 2 entry rugs, which if you cut them yourself is very reasonable. We did pay extra to have them cut using our old rug as a pattern and we also had the edges bound. We also had a cushion (rubber) backing put on so they would not slip on the tile. They did have to send it out to a person who does their cutting & binding which took a few days, but we were very pleased with the results. Good luck--

[737 Driver]

Originally Posted by neilnoff

Tor: We went to Viking/Carpet One, 21019 Spring Towne Dr, 281-355-6020 (it's off FM2920, west of I-45 by the big flea market). We worked with Melinda & Tony. The remnant was about $100 and there was enough for 2 entry rugs, which if you cut them yourself is very reasonable. We did pay extra to have them cut using our old rug as a pattern and we also had the edges bound. We also had a cushion (rubber) backing put on so they would not slip on the tile. They did have to send it out to a person who does their cutting & binding which took a few days, but we were very pleased with the results. Good luck--

Thanks Neil, I will contact them.

Tor
2017 Anthem 44B

[RoaminFree]

We have a 2017 Anthem. We had all of our carpets replaced by Brad and Hall in Elkhart. They did a great job. We chose a lighter shade of brown/tan.

[737 Driver]

Originally Posted by RoaminFree

We have a 2017 Anthem. We had all of our carpets replaced by Brad and Hall in Elkhart. They did a great job. We chose a lighter shade of brown/tan.

Did you actually meet with them or did you just pick color and ordered remotely? Do they have the carpet layouts already?

Thanks, Tor
2017 Anthem 44 B

[NowGo]

We had the same need. I did communicate with Entegra parts and they could not help with a replacement source.

Then we tried the carpet store routine. the original Entegra carpet was a very poor fit, kind of "approximately" the shape it needed to be but very poor fit. Using it for a template would have been a big mistake.

So, we just recently stumbled upon, ordered, and received a laser cut and EXACT fitting entry carpet from ShadePro. According to them they have only been doing this for 6 months.

The tech arrives with a special set of sensors that he lays in the exact area where the mat will be. Then he scans it with a special device. Next he goes away and the carpet is made to fit perfectly. Once they have done this they now have a computerized model for the specific make and model of coach.

When we spoke with them they had already done most (if not all) Tiffins and some other makes. They had no Entegra patterns... yet. We hired them, the tech arrived, and 3 days later we had the carpet. It fits exactly, including tight against the driver's wall, up under the pedals all the way to the firewall. It fits tight against the front doghouse perfectly, also around the chairs. Unbelievable really.

The carpet is marine grade carpet with rubber back. It is bound and should wear 100 times better than the short pile the coach shipped with. They have it only in dark brown and grey but we are extremely pleased with it.

All in $399.

As a result of the tech scanning our coach they now have the perfect computerized model for a 2014 Entegra Anthem.

[brobox]

Originally Posted by NowGo

We had the same need. I did communicate with Entegra parts and they could not help with a replacement source.

Then we tried the carpet store routine. the original Entegra carpet was a very poor fit, kind of "approximately" the shape it needed to be but very poor fit. Using it for a template would have been a big mistake.

So, we just recently stumbled upon, ordered, and received a laser cut and EXACT fitting entry carpet from ShadePro. According to them they have only been doing this for 6 months.

The tech arrives with a special set of sensors that he lays in the exact area where the mat will be. Then he scans it with a special device. Next he goes away and the carpet is made to fit perfectly. Once they have done this they now have a computerized model for the specific make and model of coach.

When we spoke with them they had already done most (if not all) Tiffins and some other makes. They had no Entegra patterns... yet. We hired them, the tech arrived, and 3 days later we had the carpet. It fits exactly, including tight against the driver's wall, up under the pedals all the way to the firewall. It fits tight against the front doghouse perfectly, also around the chairs. Unbelievable really.

The carpet is marine grade carpet with rubber back. It is bound and should wear 100 times better than the short pile the coach shipped with. They have it only in dark brown and grey but we are extremely pleased with it.

All in $399.

As a result of the tech scanning our coach they now have the perfect computerized model for a 2014 Entegra Anthem.

What a fantastic solution.

[RVFunlovers]

Originally Posted by brobox

What a fantastic solution.

Sounds like a great option. If we go with a carpet having it fit perfect is key.