Damaged Wheel Replacement

[BobG88]

While picking up our coach to ready for an extended trip, I was almost hit by an SUV. Definitely close (how could she NOT see a 45’ motorhome), and I had to “violently” swerve to avoid an accident.

Unfortunately, I hit a curb and damaged our right aluminum drive wheel. I’ve searched, and can’t find wheel specs to order a replacement.

I know our wheels are 22.5 x 8.25; however, does anyone possible know additional specs (bolt circle, bore, offset), or where to order a replacement, and/or brand/model/part numbers on our wheels?

As always, thanks in advance,

BG

[50sbuckeye]

Originally Posted by BobG88

While picking up our coach to ready for an extended trip, I was almost hit by an SUV. Definitely close (how could she NOT see a 45’ motorhome), and I had to “violently” swerve to avoid an accident.

Unfortunately, I hit a curb and damaged our right aluminum drive wheel. I’ve searched, and can’t find wheel specs to order a replacement.

I know our wheels are 22.5 x 8.25; however, does anyone possible know additional specs (bolt circle, bore, offset), or where to order a replacement, and/or brand/model/part numbers on our wheels?

As always, thanks in advance,

BG

I would contact Spartan Motors customer service...Spartan RV Chassis - for Coach Owners

[BobG88]

Originally Posted by 50sbuckeye

I would contact Spartan Motors customer service...Spartan RV Chassis - for Coach Owners

Thanks - I'll give them a ring Monday AM.

BG

[JimnEllen]

Pretty basic aluminum wheel specs.
You need a 10 hole aluminum hub pilot wheel with the inside polished (not a coated finish) @ 22.5 x 8.25 to match what was bent.

[Rollin101]

Originally Posted by BobG88

While picking up our coach to ready for an extended trip, I was almost hit by an SUV. Definitely close (how could she NOT see a 45’ motorhome), and I had to “violently” swerve to avoid an accident.

Unfortunately, I hit a curb and damaged our right aluminum drive wheel. I’ve searched, and can’t find wheel specs to order a replacement.

I know our wheels are 22.5 x 8.25; however, does anyone possible know additional specs (bolt circle, bore, offset), or where to order a replacement, and/or brand/model/part numbers on our wheels?

As always, thanks in advance,

BG

You can’t see a 45’ Mh while looking at a cell phone!

[jacwjames]

There should be a number stamped on the rim, you can use this to find a replacement.



My rim is made by Accuride, I bought a spare from Florida Shores Truck Center in Edgewater. At the time they had the best price.

[tom chelbana]

If you have the 315 tires on the drive axle that rim is a 9 inch rim. If you have a 295 or 275 then that would be the 8.25 rim.

[Jolar01]

I replaced a outside drive wheel in July the part # from Cassy Goodenough at Spartan was 41644XP (8.25”) Accuride. This was for an 2016 Aspire with 275/80R/22.5 drive tires. Rim was purchased from H and S Industries at cost of $229.95 price now $279.00 (on Amazon).
Casey’s email is Casey.goodenough@spartan.com

I would double check the part # with Spartan just to be sure (2016 vs 2017).
Larry

[BobG88]

Great - thanks to all. Yes, it's a 295, so 22.5 x 8.25 would be correct.

I'd actually saved that Accuride wheel on Amazon (41644XP) hoping it was correct. I'll check with Casey to make sure. Thanks,

BG

[Jolar01]

Originally Posted by BobG88

Great - thanks to all. Yes, it's a 295, so 22.5 x 8.25 would be correct.



I'd actually saved that Accuride wheel on Amazon (41644XP) hoping it was correct. I'll check with Casey to make sure. Thanks,



BG

[emoji106]
Larry

[brobox]

If wheel prices are like tires, they are all over the board. I just had a road hazard cut on an OEM Goodyear Wrangler (Ugh) tires on my toad. Prices locally $245-$275, and they all had to order one. Online $123. to $235. Discount tire had OEM's for $123. It might pay to shop the wheel as well.

[BobG88]

Originally Posted by brobox

If wheel prices are like tires, they are all over the board. I just had a road hazard cut on an OEM Goodyear Wrangler (Ugh) tires on my toad. Prices locally $245-$275, and they all had to order one. Online $123. to $235. Discount tire had OEM's for $123. It might pay to shop the wheel as well.

Thanks - once I confirm the part number, will do. We leave Monday to head (further) south for 3 months, so I'll have quite a bit of time to spec and order the wheel.

BG

[brobox]

Originally Posted by BobG88

Thanks - once I confirm the part number, will do. We leave Monday to head (further) south for 3 months, so I'll have quite a bit of time to spec and order the wheel.

BG

I googled the tire model and size.... about ten suppliers and prices came up. Tire shops will accept direct delivery since they don't stock it, saves from messing with it. Price for your old wheel will sometimes pay for mounting a balancing. Scrap Aluminum Wheels (clean)$0.62 lb

[BobG88]

Originally Posted by brobox

I googled the tire model and size.... about ten suppliers and prices came up. Tire shops will accept direct delivery since they don't stock it, saves from messing with it. Price for your old wheel will sometimes pay for mounting a balancing. Scrap Aluminum Wheels (clean)$0.62 lb

Thanks Chuck - very helpful info.

BG