 |
08-29-2022, 08:32 PM
|
#1
|
Senior Member
Join Date: Jan 2011
Location: Fort walton Beach Fl
Posts: 1,051
|
Dash Air
Any one know how to change the blower on the dash air/heater? Can you do it from the fire wall generator side or does the dash have to be tore apart?
__________________
Larry
2016 Entegra Cornerstone
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
08-29-2022, 08:39 PM
|
#2
|
Senior Member
Join Date: Apr 2012
Location: Hilton Head Island, SC
Posts: 1,330
|
I believe you need to do it from the inside. If you pull the drawer out you can see the blower. The lower part of the dash on the passenger side should come off for better access.
__________________
Jeanne & Rosko 
2017 Cornerstone 45B
2014 Anthem 44B Classic (traded)
|
|
|
08-30-2022, 03:55 AM
|
#3
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 30,694
|
The Classics had a run of bad blower motors. Here are several post with some tips to tackle the project. Jenne is correct, it can be removed by removing the console drawer https://www.google.com/search?q=Ente...earch=irv2.com
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
08-30-2022, 06:30 AM
|
#4
|
Senior Member
Join Date: Jan 2011
Location: Fort walton Beach Fl
Posts: 1,051
|
Quote:
Originally Posted by brobox
|
Thanks folks!
__________________
Larry
2016 Entegra Cornerstone
|
|
|
08-30-2022, 07:37 AM
|
#5
|
Registered User
Join Date: Feb 2021
Posts: 1,337
|
You have to do it from the inside. NIRVC can help with this repair if needed.
|
|
|
09-04-2022, 07:03 AM
|
#6
|
Senior Member
Join Date: Apr 2012
Location: Hilton Head Island, SC
Posts: 1,330
|
I was looking for something else and came across this file. It should help with the blower motor replacement if you decide to do it yourself.
__________________
Jeanne & Rosko 
2017 Cornerstone 45B
2014 Anthem 44B Classic (traded)
|
|
|
09-05-2022, 02:47 PM
|
#7
|
Senior Member
Join Date: Jan 2011
Location: Fort walton Beach Fl
Posts: 1,051
|
Quote:
Originally Posted by Magic-carpet
I was looking for something else and came across this file. It should help with the blower motor replacement if you decide to do it yourself.
|
Thanks alot, this helps!!
Larry
__________________
Larry
2016 Entegra Cornerstone
|
|
|
09-10-2022, 04:04 PM
|
#8
|
Senior Member
Join Date: Oct 2017
Posts: 302
|
I have 15 Aspire & had a loud noise, some times, in the front end. The factory never did anything for me. We have put up with it for years. They send me a brand new blower motor which I never took it out of the box. Found out from P.G. That some one didn’t silicone the air box under the dash & the wind causes it to make a noise. After all these years something simple.
|
|
|
09-10-2022, 08:05 PM
|
#9
|
Senior Member
Join Date: Jan 2011
Location: Fort walton Beach Fl
Posts: 1,051
|
Quote:
Originally Posted by Craneboy302
I have 15 Aspire & had a loud noise, some times, in the front end. The factory never did anything for me. We have put up with it for years. They send me a brand new blower motor which I never took it out of the box. Found out from P.G. That some one didn’t silicone the air box under the dash & the wind causes it to make a noise. After all these years something simple.
|
I wish mine was that simple, it is the motor, just started after 6 years, and starts after about 30 minutes use. I have the old motor out waiting on new unit then put this mess back together. tearing part of dash apart was time consuming!
__________________
Larry
2016 Entegra Cornerstone
|
|
|
09-10-2022, 08:06 PM
|
#10
|
Senior Member
Join Date: Aug 2020
Location: Ohio
Posts: 2,257
|
Oh.. and yes.. on mine.. I have an evap temp sensor..
Good luck and keep us posted
__________________
2000 southwind storm, workhorse custom chassis with 7.4l vortec
|
|
|
 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|