Dinette light

[soundsuperio]

I want to change the head knocker dinette light on our 2015 Anthem. Can I use any 110 volt fixture or is there something special about the factory lights/wiring?
Thinking of going with a lower profile light in lieu of wearing a hard hat.
Thanks in advance.

[Tim Fox]

Should be 12 volt.

[AnotherMike]

If you are at all handy it would not be difficult to take a 120 volt fixture and swap some 12 volt lights into it. That's what I did.

Mike

[soundsuperio]

The problem is how low the fixture is. It is an obstacle when learning in to get stuff out of the cabinet. What I need to know is what is the wiring going to the fixture. Is the wiring 110 or 12 volt or both?

[brobox]

The dinette light in the Entegra is 12v. The new fixtures are flush. There was a post if the new fixtures fit the hole cutout for the head banger.

[Tom78418]

You are going to miss the headaches and the occasional opportunity to know what is like to be a red head. Every time I have an up close and personal contact with the fixture, I have an additional injury by kicking myself for not replacing it.

[baddmann]

I hit my head the other day so hard it bent the light fixture...

My friend has a 2017 Aspire and his light is flush.

Has anyone sourced a compatible light?