Community Forums

gasman405 · 08-05-2014, 10:35 AM

I have a 2014 aspire and the light on one of my docking light switch does not work. Can the light be replaced or do I need a new switch.

2014 Entegra Aspire
2010 Honda CR-V

hogdriver · 08-05-2014, 11:49 AM

Those switches are Carling Contura II switches. I do not think the bulb can be changed. Try Mouser Electronics on the web and look for a new switch body. The top part with the labeling snaps on/off. You have to look pretty carefully at the specs to choose the correct one because there's dozen of them.

VVAAC00-000 Carling Technologies | Mouser

Knob Creek · 08-05-2014, 09:56 PM

I just replaced the Main Power switch at the driver's side panel for the same reason. The replaced switch worked okay. Just the bulb went out. It is now my spare. The replacement job was pretty much plug and play.

bcp · 08-05-2014, 10:07 PM

Why not call Entegra CS and ask them to send you one. It should be covered under warranty.

oneal · 08-06-2014, 03:06 AM

I agree with contacting CS since your coach is new but if you purchase yourself there are many makers of the Contura switches and some are available with LED illumination lights which will last much longer.