Entegra Aspire headlights

[ffcars]

We have a 2022 Aspire. What replacement LED bulbs will fit the headlights, high beans and fog lights?

We try not to drive at night, but it’s unavoidable sometimes. The lights stink.

I looked at the housing and the high been was easy to twist and remove. It has an H9 bulb. But I can’t figure out how to remove the headlight or fog light bulbs.

Also, has anyone ever added a set of driving lights to the bottom?

Thanks!

[Kevin Bell]

Originally Posted by ffcars

We have a 2022 Aspire. What replacement LED bulbs will fit the headlights, high beans and fog lights?

We try not to drive at night, but it’s unavoidable sometimes. The lights stink.

I looked at the housing and the high been was easy to twist and remove. It has an H9 bulb. But I can’t figure out how to remove the headlight or fog light bulbs.

Also, has anyone ever added a set of driving lights to the bottom?

Thanks!

Your factory low beams are HID (high-intensity discharge) projector style lamps (first picture). These are much brighter than LED bulbs and are not interchangeable and it would be a downgrade.
The H9 high beam can be upgraded to LED, as can the H7 fog lights.
To remove the fog light bulb, pop the rubber boot off the back, you will see the retaining clamp (second picture). Squeeze the retainer clamp so it will pop out off the back of the bulb and free the bulb to be pulled out.

[Mwoodofd]

I have a 13 Aspire and it is very similar to what Kevin posted. When I removed my rubber boot on one of the lights, there was a ground wire that was routed to inside the light that pulled loose. Be careful pulling that rubber boot off. I had to remove the whole light assembly to put the ground wire back in place. The newer models could be different now, but it was a job just to put that ground wire back in place.

[ffcars]

Originally Posted by Kevin Bell

Your factory low beams are HID (high-intensity discharge) projector style lamps (first picture). These are much brighter than LED bulbs and are not interchangeable and it would be a downgrade.
The H9 high beam can be upgraded to LED, as can the H7 fog lights.
To remove the fog light bulb, pop the rubber boot off the back, you will see the retaining clamp (second picture). Squeeze the retainer clamp so it will pop out off the back of the bulb and free the bulb to be pulled out.

Thank you Kevin!