Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Entegra Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-16-2020, 11:46 AM   #15
Senior Member
 
Join Date: May 2017
Location: Bryan, TX
Posts: 310
Quote:
Originally Posted by ECVB View Post
Are these the one you referring to on Ebay ?



https://www.ebay.com/itm/MCD-RV-SHAD...IAAOSwGVRdDOiK



looks like this has 4 wires coming out of it so which ones would we use ?


Same motor, yes. Green wire is the programming button. Red and black are together, yellow wire is separate. I am guessing that yellow is in case it is on a front windshield and has to connect to an override current that will not allow night shade to operate when engine is running, but not sure.
__________________
David and Andi
2016 Cornerstone 45A
Bryan, Tx
DavidH2 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-16-2020, 12:50 PM   #16
Senior Member
 
ECVB's Avatar
 
Join Date: Nov 2019
Location: TEXAS
Posts: 450
Thanks ,
I went ahead and pick up a couple as a spare as just incase..




Quote:
Originally Posted by DavidH2 View Post
Same motor, yes. Green wire is the programming button. Red and black are together, yellow wire is separate. I am guessing that yellow is in case it is on a front windshield and has to connect to an override current that will not allow night shade to operate when engine is running, but not sure.
__________________
2014 Entegra Anthem DEQ
2020 Jeep Gladiator
2017 Indian RoadMaster
ECVB is offline   Reply With Quote
Old 04-16-2020, 01:18 PM   #17
Senior Member
 
Join Date: May 2017
Location: Bryan, TX
Posts: 310
Quote:
Originally Posted by ECVB View Post
Thanks ,

I went ahead and pick up a couple as a spare as just incase..


Used my volt meter first and the red/black pair seems to be all you need. Just make sure you test them before install because apparently the motor sense power from both wires and reverses based on hot side. After checking to confirm voltage ( first time my meter went negative so reversed the wires) I tested with wall switch to confirm the direction of shade when powered. Now the fun part of reinstalling the dual shade🤬
__________________
David and Andi
2016 Cornerstone 45A
Bryan, Tx
DavidH2 is offline   Reply With Quote
Old 04-16-2020, 02:58 PM   #18
Senior Member
 
ECVB's Avatar
 
Join Date: Nov 2019
Location: TEXAS
Posts: 450
Thanks, !

ouch.. i would help




Quote:
Originally Posted by DavidH2 View Post
Used my volt meter first and the red/black pair seems to be all you need. Just make sure you test them before install because apparently the motor sense power from both wires and reverses based on hot side. After checking to confirm voltage ( first time my meter went negative so reversed the wires) I tested with wall switch to confirm the direction of shade when powered. Now the fun part of reinstalling the dual shade🤬
__________________
2014 Entegra Anthem DEQ
2020 Jeep Gladiator
2017 Indian RoadMaster
ECVB is offline   Reply With Quote
Old 04-16-2020, 04:40 PM   #19
Senior Member
 
Join Date: May 2017
Location: Bryan, TX
Posts: 310
Quote:
Originally Posted by ECVB View Post
Thanks, !



ouch.. i would help


So that I didn’t later regret it I used some duct tape to store the yellow wire on the side of the dual bracket- out if sight. I also found the two mounting screws to not be well aligned to the type of dual bracket in my 16 CS.
__________________
David and Andi
2016 Cornerstone 45A
Bryan, Tx
DavidH2 is offline   Reply With Quote
Old 04-18-2020, 01:15 PM   #20
Senior Member
 
Dieselgem's Avatar
 
Join Date: Sep 2007
Location: PA & FL
Posts: 1,406
Quote:
Originally Posted by ECVB View Post
Thanks, !

ouch.. i would help

Just saw your post, I did not use the third wire.
Dieselgem is offline   Reply With Quote
Reply

Tags
ace, replace



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shade Motors, Again! Bill in FL Entegra Owner's Forum 8 09-10-2014 03:02 AM
Replacing 2013 Entegra Shade Motors DSL417 Entegra Owner's Forum 6 07-04-2014 05:19 PM
Shade Motors SonnyB Entegra Owner's Forum 7 06-29-2014 09:25 PM
Shade motors TXBart Entegra Owner's Forum 2 10-21-2013 01:08 PM
For those who have replaced their Norcold Winepress RV Systems & Appliances 1 04-08-2013 05:50 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.