Originally Posted by johnnyreno
I Posted awhile ago that I had a rattle behind the driver seat, well it turned out to be the slide roller right behind drivers chair, whats the best way adjust it to stay closer to the floor im away right now and will want to djust it to be lower its right over the batteries when extended but no access,
JR - If I read your post correctly, I had the exact same issue on both the PS and DS slide units. The solution for me was to have spacers/washers inserted above the roller unit which then in turn pushed the roller down to the floor eliminating the tapping of the roller on the tile.
In order to get the spacers in place, you have to lift the slide from the inside by pushing up on top of the slide unit so you can get better access to the rollers. It took four guys to tilt/lift up the slide so one tech was able to get to the rollers.
It sounds like you might need the same fix. Hope this helps.
In the meantime, try sliding a magazine between the roller and the tile to stop that annoying tapping.