fuse for blind spot blinking lights on dash

[cewgcw]

Could someone please tell me what fuse to pull to disable the blind spot detection system which has been blinking at me for many miles. Thanks

[Nowabeachbum]

It’s in the driver’s side compartment, there is a plastic fuse box. Take out the 2 screws exposing the fuses, blind side monitor fuse is marked. I think it’s a 5 amp fuse.

[seeg]

You might want to check out the sending unit on the side of your coach. I talked to the owner of another coach who was having all his resealed as the connections had been contaminated by water and road grit.

[cewgcw]

Thanks Gary I found it and pulled it out. One less aggravation until I can get it repaired

[Gary.Jones]

Dan

I don’t have my coach yet so trying to anticipate problems/issues. Do you know if the sensor units can simply be removed (screws.) and resealed before the problem develops?

Gary

[seeg]

Originally Posted by Gary.Jones

Dan

I don’t have my coach yet so trying to anticipate problems/issues. Do you know if the sensor units can simply be removed (screws.) and resealed before the problem develops?

Gary

Gary

He had a 2016 or 2017 and the back of the units weren't
sealed. He checked mine and stated the factory had caught the problem. I did a lot of rain driving over spring break with the kids and no problems. However it wouldn't hurt to check.