Grey sensor

[lands]

Didn’t work then worked now does not work again is there a way to see level of Grey did updates and did rebooted 12 volt system should I try reboot a few times

[brobox]

What year coach? The sensors have changed the last couple of years. Not all sensors are the same anymore.

[lands]

Sorry 2021 anthem

[brobox]

Originally Posted by lands

Sorry 2021 anthem

Did you just load the 1.4.16 update when the problem started?
Might want to add a signature line so others can help with the correct answers.

[lands]

No it seemed to start before the last update did update thinking might help

[brobox]

Originally Posted by lands

No it seemed to start before the last update did update thinking might help

The tank sensor correction was in the 1.4.8 update. It looks like that update is not holding, nor is the new update helping. That is one I would pass on to Firefly so the are aware for the next update that there are still problems with their sensors.

[lands]

Will call them Monday thanks guess will just have to keep mindful on Grey tank usage

[buddy110]

Originally Posted by lands

No it seemed to start before the last update did update thinking might help

This exact thing happened to me with the black tank sensor. It had been reading fine. Flushed it, rinsed it and closed the valve. Two days later I updated to .16. As I looked back I realized the sensor hadn't moved even with a couple days use prior to the update and now after 5 days it's still reading empty.

[brobox]

Originally Posted by buddy110

This exact thing happened to me with the black tank sensor. It had been reading fine. Flushed it, rinsed it and closed the valve. Two days later I updated to .16. As I looked back I realized the sensor hadn't moved even with a couple days use prior to the update and now after 5 days it's still reading empty.

My Black tank sensor with 1.4.10 only read a 1/3 full on the last trip when it was full enough to put the amber light on the toilet. Dumped...sure enough a lot fuller than 1/3.

[lands]

Is there anyplace u can look at Grey tank to Check level

[buddy110]

I just dumped and rinsed my tank again. Using a flow meter I observed the gauge reading: 15%, 20, 25, empty, 20, 30, 50, empty and finally when I have pumped 40 gallons in, 85%. It seems to need time to recover also. If I fill say, 20 gallons and then stop, let it catch up it begins to read, but never close to accurately. It might read 30% at that point. It's crazy

[brobox]

Originally Posted by lands

Is there anyplace u can look at Grey tank to Check level

No there is not. We are back to the old fashion method. It the shower, dishwasher or kitchen sink gurgle, it's time to dump the gray tank. If the bathrooms stink, it's time to dump the black tank. However, on mine the light on the macerator toilet lets me know.

[brobox]

Originally Posted by buddy110

I just dumped and rinsed my tank again. Using a flow meter I observed the gauge reading: 15%, 20, 25, empty, 20, 30, 50, empty and finally when I have pumped 40 gallons in, 85%. It seems to need time to recover also. If I fill say, 20 gallons and then stop, let it catch up it begins to read, but never close to accurately. It might read 30% at that point. It's crazy

After a couple of short trips, I still do not have any faith in the Firefly sensors.

[Tim Fox]

I used Chucks method on our 21 Anthem. Gauge was never reliable.