K1, K2, K3&K4 chassis grease/lube/lubrication points

[ChuckGirard]

For those needing a full list from spartan on their entegra chassis on where to greese here is the official list.

Just about to undergo this maintenance myself! Any tips / tricks additional info is appreciated!

[RVFunlovers]

Thanks for sharing.

[Tony Wilson]

Excellent doc. I was looking for it for my DIY greasing. Thanks for sharing, Chuck.

[Topperace]

Excellent! Nice to have

[WDW]

Thank you!

[buddy110]

Originally Posted by ChuckGirard

For those needing a full list from spartan on their entegra chassis on where to greese here is the official list.

Just about to undergo this maintenance myself! Any tips / tricks additional info is appreciated!

Very helpful list!

Get a lock-n-lube grease tip. You'll also need a right angle grease tip for the upper steering U joint

[brobox]

Nice detailed list, thank you! It's bookmarked.

[Orhusky]

Great info. Have you found the documentation on setting the ride height for a K2 with independent front suspension? Thanks

[Mighty_J]

Originally Posted by Orhusky

Great info. Have you found the documentation on setting the ride height for a K2 with independent front suspension? Thanks

The ride height specs are typically included in the Spartan general owner’s manual that comes with the coach. For instance…

K2 SERIES CHASSIS
INDEPENDENT FRONT SUSPENSION (IFS):
Model 2000: 9.25” Measuring the height of the air spring.
Model 1700: 9.25” Measuring the height of the air spring.
ZF IFS: 10.00” Measuring the height of the air spring.
FRONT SUSPENSION (I-BEAM AXLE):
AIRTEK: 7.75” Measuring the height of the air spring.
Model 1600: 24.66” Measuring the distance between the shock centers of the shock mount.
REAR SUSPENSION:
240AR : 8.25” Measuring from bottom of chassis frame rail to center of axle housing.
HTB: 8.50” Measuring from bottom of chassis frame rail to center of axle housing.
PRIMAAX: 18.40” Measuring the distance between the shock centers of the shock mount.
RD2300/2400: 20.00” Measuring the distance between the shock centers of the shock mount.

The ride height adjustment is dependent on the suspension and should be included in the individual suspension manuals that Spartan includes. If you can tell me what suspension, I can see if I can find it.

[mbaril]

does anyone can tell me what kind of lube is best? there is so many...
tks.

[Orhusky]

Originally Posted by Mighty_J

The ride height specs are typically included in the Spartan general owner’s manual that comes with the coach. For instance…

K2 SERIES CHASSIS
INDEPENDENT FRONT SUSPENSION (IFS):
Model 2000: 9.25” Measuring the height of the air spring.
Model 1700: 9.25” Measuring the height of the air spring.
ZF IFS: 10.00” Measuring the height of the air spring.
FRONT SUSPENSION (I-BEAM AXLE):
AIRTEK: 7.75” Measuring the height of the air spring.
Model 1600: 24.66” Measuring the distance between the shock centers of the shock mount.
REAR SUSPENSION:
240AR : 8.25” Measuring from bottom of chassis frame rail to center of axle housing.
HTB: 8.50” Measuring from bottom of chassis frame rail to center of axle housing.
PRIMAAX: 18.40” Measuring the distance between the shock centers of the shock mount.
RD2300/2400: 20.00” Measuring the distance between the shock centers of the shock mount.

The ride height adjustment is dependent on the suspension and should be included in the individual suspension manuals that Spartan includes. If you can tell me what suspension, I can see if I can find it.

Our Rear Axel is a RS19144NFLF343-488

[Orhusky]

Originally Posted by mbaril

does anyone can tell me what kind of lube is best? there is so many...
tks.

I have been using this in my grease gun for just about everything for years!

https://www.amsoil.com/p/synthetic-m...se-nlgi-2-glc/