Community Forums

SJMnice · 05-02-2015, 01:47 PM

Anyone experienced a pesky dripping kitchen faucet? I have been unable to determine the make/model of the faucet on a 2014 Anthem. Thought I might be able to find a schematic on how the faucet is put together and the kind of washers, o-rings needed to fix the drip. I attempted to take the housing off the handle to look for washers and o-rings but could not easily get housing over the handle to see what I could see, but stopped - didn't want to break anything. Thought I would check the forum, but didn't see any threads or postings on this issue. Any thoughts suggestions? Thanks

brobox · 05-02-2015, 04:01 PM

Probably a bad cartridge. A call to CS is in order on that one. All of the new faucets I have worked with lately are cartridges and not repairable.

Bill in FL · 05-02-2015, 04:21 PM

Mine does not drip but the handle is getting very hard to operate. Haven't been able to determine how to take it apart to see what the problem is. Any ideas there would be appreciated.

brobox · 05-02-2015, 04:38 PM

Bill, I will try to remember to look at mine tomorrow. In the mean time come down to the hanger and pick up our hand sledge hammer, that should be big enough.

Bill in FL · 05-02-2015, 04:42 PM

Quote:

Originally Posted by brobox

Bill, I will try to remember to look at mine tomorrow. In the mean time come down to the hanger and pick up our hand sledge hammer, that should be big enough.