Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Entegra Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-21-2021, 11:27 AM   #1
Senior Member
 
N6CUS's Avatar
 
Entegra Owners Club
Join Date: May 2010
Location: So Cal
Posts: 508
Light control panel in the bedroom stopped working

I was making the bed and when i went to turn off the light i touched the panel and a spark jumped from my fingers and now no lights on that panel and nothing works on that panel only. all the rest function normal.
this is the panel by the door just to show what kind of panel im talking about

Any Ideas
Attached Thumbnails
Click image for larger version

Name:	doorpaneMG_1418.jpg
Views:	9
Size:	309.9 KB
ID:	343764  
__________________
Ron & Katie / N6CUS (Extra Class) Ham Monitor 146.520
2018 Entegra Anthem 44F - Toad 2014 Chevy Silverado and 2006 Jeep Liberty
2008 Discovery 40X - 1999 Bounder 34v -- US Navy USS Courtney DE1021
N6CUS is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-21-2021, 11:33 AM   #2
Senior Member
 
brobox's Avatar
 
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 26,448
Static electricity probably popped the panel. Remove the panel, plug it in the bathroom fuse panel port....it probably still does not work.....order a new one, it got fried.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
brobox is offline   Reply With Quote
Old 09-21-2021, 12:11 PM   #3
Senior Member
 
voltdoc's Avatar
 
Entegra Owners Club
Join Date: Oct 2010
Location: East Greenwich, RI
Posts: 1,756
Agree with brobox, in 2017 we (actually DW aka "sparky") blew out 9 panels in a 6 month period. Mine did not have ESD (electro static discharge) protection (they do now), but your panels should have it built in, so I'm a bit surprised it was destroyed. You will most likely need to order a new panel.
__________________
Rob & Linda https://MyQuantumDiscovery.com
2017 Entegra Aspire 44B - 2021 Jeep Grand Cherokee L Overland
2013 Entegra Aspire 42RBQ
voltdoc is offline   Reply With Quote
Old 09-21-2021, 12:22 PM   #4
Senior Member
 
Gary.Jones's Avatar


 
Join Date: Oct 2012
Location: Louisiana
Posts: 9,540
Blog Entries: 1
Ron

When we travel to the SouthWest and Quartzsite from th humid Gulf Coast, we always have trouble with static electricity, This is particularly true in the winter. We try to remember to always touch the mounting ring around the main VegaTouch panel or anything that is grounded before we touch any of the switch or main panels as it is easy to s=draw a spark.

I think Chuck is giving you the right steps to try to resolve. If the panel is good, his steps should get you reset. If not, the panels should be available, pre-programmed, and with the same labels and functions as your originals.

You should be able to access all those lights from the main wall panel

Gary
__________________
Gary and Dee, Zowie and Bowie (traveling cat sibs)
2019 Cornerstone 45B, X15-605hp, Imperial, Spartan K3,
2013 Honda CR-V toad, Demco Excali-Bar II,
Demco Baseplate, Demco Toad Light system, 73 de W5FI
Gary.Jones is offline   Reply With Quote
Old 09-21-2021, 03:44 PM   #5
Senior Member
 
N6CUS's Avatar
 
Entegra Owners Club
Join Date: May 2010
Location: So Cal
Posts: 508
All is well now

I talked to Kelly at Entegra and she told to shut off the salesman switch for a couple min then back on AND if the dont work take the unit off and un plug it and put tape on the loose wire so it doesn't fall in to the wall. The plug it in to some outlet in the forward bath room fuse area it should light up and work if not replace unit but when unit


BUT

it works after just shutting off the salesman with by the door and back on..

thanks for all the helped
See your in Quartzsite in Jan if there will be a gathering
__________________
Ron & Katie / N6CUS (Extra Class) Ham Monitor 146.520
2018 Entegra Anthem 44F - Toad 2014 Chevy Silverado and 2006 Jeep Liberty
2008 Discovery 40X - 1999 Bounder 34v -- US Navy USS Courtney DE1021
N6CUS is offline   Reply With Quote
Old 09-21-2021, 04:54 PM   #6
Senior Member
 
bevandtomH's Avatar
 
Join Date: Feb 2013
Posts: 1,366
Like Ron, we fried two of our wall switches due to static.
Unfortunately, the new ones donít shut off with the panel over the bed so our rear bath is a little bright at night. If there is a cancel feature I have not found it.
__________________
___________
Tom & Bev, Riley(3yo Lab)
2014 Entegra Aspire 44b
2017 Jeep JKU
bevandtomH is offline   Reply With Quote
Old 09-24-2021, 10:00 AM   #7
Senior Member
 
Gary.Jones's Avatar


 
Join Date: Oct 2012
Location: Louisiana
Posts: 9,540
Blog Entries: 1
Ron

There will be a gathering in Quartzsite. I am trying to get the announcement and registration posted on the ECOA website. Should not be too much longer.

I will also post a note about it being up on the ECIA web site when we have it finished.

Gary
__________________
Gary and Dee, Zowie and Bowie (traveling cat sibs)
2019 Cornerstone 45B, X15-605hp, Imperial, Spartan K3,
2013 Honda CR-V toad, Demco Excali-Bar II,
Demco Baseplate, Demco Toad Light system, 73 de W5FI
Gary.Jones is offline   Reply With Quote
Reply

Tags
light, panel



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reading Lights stopped working Bedroom Slide Heinz Gee Tiffin Owner's Forum 0 05-02-2021 02:08 PM
Bedroom slide out stopped working national Class A Motorhome Discussions 14 02-28-2021 10:38 AM
Light switch panel in master bedroom under overhead cabinets not working?! kpecks Newmar Owner's Forum 8 05-29-2020 12:15 PM
Fuel Gauge & Annunciator Panel stopped working. Radar1957 Freightliner Motorhome Chassis Forum 11 10-02-2014 01:04 PM
Bedroom Lights Stopped Working rcolman National RV Owner's Forum 3 09-20-2011 10:34 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 03:30 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.