No high beam

[Skykingtcb]

I have 2022 Aspire 40 P and cannot figure out to turn on high beam. It may be operator error. I received a 2021 owners manual with 2022. The turn signal in 2021 manuel says pull turn signal switch up. My does not work like this it does however does have rubber on the end of turn signal. So I am thinking push in rubber maybe a switch Nope . I am either retarded or I have a defective high beam switch. Anybody that has 2022 school me.

[RandyRich]

Originally Posted by Skykingtcb

I have 2022 Aspire 40 P and cannot figure out to turn on high beam. It may be operator error. I received a 2021 owners manual with 2022. The turn signal in 2021 manuel says pull turn signal switch up. My does not work like this it does however does have rubber on the end of turn signal. So I am thinking push in rubber maybe a switch Nope . I am either retarded or I have a defective high beam switch. Anybody that has 2022 school me.

I have the exact same problem. The manual says its on the turn signal switch but I can't seem to get it to switch and I do not want to break the thing off. Maybe someone can help us.

[Gasman 2]

Skykingtbc,

It’s possible you need to have the ignition on and perhaps the engine running before the high beams will come on.
If I recall correctly that’s the way it was on the Entegra we owned.

[Warhorse6]

Try pushing the arm forward to turn on and pull back to turn off

[J Gunter]

Take a pair of side cutters and trim the plastic so the turn signal arm can be pulled up. My 2020 was the same way with the interference from the plastic shroud. After trimming the plastic the high beams work easy when pulling the turn signal arm up.
Try it you’ll like it.