Community Forums

Les1951 · 09-24-2021, 03:14 PM

I replaced the 3 camera switch box ( silver box behind the TV ) today with no change in the issue. At this point we have replaced the core unit, CVS unit, and the 3 camera unit. All connections we can find, and verified the screens and camera’s. I am not sure where to go from here….

777 Driver · 09-24-2021, 03:58 PM

Quote:

Originally Posted by Les1951

I replaced the 3 camera switch box ( silver box behind the TV ) today with no change in the issue. At this point we have replaced the core unit, CVS unit, and the 3 camera unit. All connections we can find, and verified the screens and camera’s. I am not sure where to go from here….

Perhaps you need to go for a nice ride in your "Other RV". That looks like fun!

Seriously, it sounds like you've changed pretty much everything in the signal path from the cameras to the display. Have you tried to display the camera video on any of the TV's rather than on the Infotainment screen? Is that not a different signal path than to the Infotainment screen?

Take care,
Stu

Les1951 · 09-27-2021, 05:37 AM

After changing the 3 camera switching component, and seeing no change in the issue, I decided to do a reboot of the entire coach and see if that would bring the new switch on line. Lo and behold the rear camera came back on line, although the right mirror camera did not. It makes me wonder if I have been chasing a multiple point failure. The 3 camera switch, and a bad mirror camera failure at the same time seems remote, but possible. Does anyone know a good source for the mirror camera ?

Les1951 · 09-28-2021, 06:10 AM

A new mirror mounted side camera is now on order. $309 plus shipping. I attempted to remove the old camera from the mirror without success. Ramco tech support said the knurled nut holding camera in the mirror is installed with lock-tight.

Les1951 · 10-01-2021, 11:52 AM

The right mirror camera came today, and I installed it. The camera system is back to normal now. It would appear I had 2 faults, the 3 camera switching module and the right camera. I am not sure how these could have been related, but they occurred simultaneously. Perhaps a camera fault wiped out the switch module ?

Tim Fox · 10-03-2021, 07:45 AM

Pretty good perseverance. Glad all is back to normal and thanks for follow up.

rgebbie · 08-23-2022, 08:13 AM

i have a 2020 cornerstone with a no video and camera's cycling randomly. What and where is the "salesman" switch? so i can try a reboot.

rich

brobox · 08-23-2022, 08:58 AM

Just as you come in the door. It will have a red light

BigKahuna · 10-02-2022, 12:19 AM

When y'all are saying 12V reports, are you meaning the house power switch in the entry?

lands · 10-02-2022, 06:34 AM

we had to reset 12 volt multiple times to get rear and 360 cameras back up on our trip to entegra asked about that issue and they said just reset 12 volt. That has fixed it everytime so far but you do have to leave off for a minute or so if you turn back on right away it doesn't fix issue. Annoying but not the worst thing. yes the 12 volt is the switch by the door

mag150 · 10-02-2022, 03:13 PM

We are having the same issue on our 22 Anthem with rear camera. Sometimes it works but mostly not, although it always works on instrument panel if switched to camera. That makes me think it's a connection issue on radio.

Ready2Travel · 08-09-2023, 11:29 AM

"We are having the same issue with the rear camera, as others have mentioned.
My first step was to unplug camera, at box in storage bay."

Where is this box, which storage bay?

Ready2Travel · 08-09-2023, 01:42 PM

Quote:

Originally Posted by Torrencefljr

Afternoon all
On my 2017 Anthem, the back camera not working/no video detected, was the video splitter. Once we replace the splitter and unplug the front L/R mirrors back camera work perfectly. I drive about 500 miles so far and no issues. The front mirrors will be replace mid September.

Where is this video splitter located?