Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Entegra Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-15-2014, 10:40 PM   #1
Registered User
 
Join Date: Apr 2013
Location: NV
Posts: 2,227
Passenger window

While looking to quiet passenger side down while underway. I noticed the window right behind passengers head does not fit in the cutout properly the bezel at the top where the screws are way off, the bezel on 1 side is laying out on top of the other side of the bezel there is no way it will fit in the cutout, and the wind out vent bottom window is separating from the seam looks. like it might fall out I will add some clear silicone tape it down I am sure its because the bezel is tweaked. I can get a pic in the morning if need be
johnnyreno is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-16-2014, 01:11 AM   #2
Registered User
 
Join Date: Apr 2013
Location: NV
Posts: 2,227
I have no doubt cus service will take care of me, they are all great there question is im in storage now will I have a new window shipped or will I get a local guy to look at it or what any advice it may be where the whistle was coming from I posted earlier thx gang
johnnyreno is offline   Reply With Quote
Old 01-16-2014, 05:11 AM   #3
Senior Member
 
brobox's Avatar
 
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 26,120
I would get a picture up to CS. They need to see what has happened in assembly and address the problem so it does not continue to happen. Without seeing a photo it is hard to imiagine that the window cut out is not large enough. You would think that would have been done with the use of a jig so all cutouts are the same size.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
brobox is offline   Reply With Quote
Old 01-16-2014, 08:37 AM   #4
Registered User
 
Join Date: Apr 2013
Location: NV
Posts: 2,227
I am getting a pic today, I think it might have to do with the slight whistle I had. You have a point I would think it was more on the window mfg, I am glad I may have found the chatter box on that side, this is the stuff to expect on a new coach. When I get pics il post em as I am far from a expert.
johnnyreno is offline   Reply With Quote
Old 01-16-2014, 12:29 PM   #5
Member
 
RLWoud's Avatar
 
Join Date: Feb 2013
Location: North America
Posts: 43
Quote:
Originally Posted by johnnyreno View Post
I am getting a pic today, I think it might have to do with the slight whistle I had. You have a point I would think it was more on the window mfg, I am glad I may have found the chatter box on that side, this is the stuff to expect on a new coach. When I get pics il post em as I am far from a expert.
Our window in the Aspire DEQ was squeaky when driving, so I unscrewed the window frame and could see the rub marks on the wall panel and the frame.
I trimmed the wall panel cutout with a board cutter, screwed the frame back in and the noise is gone.

Ron
RLWoud is offline   Reply With Quote
Old 01-16-2014, 04:13 PM   #6
Senior Member
 
BUS4US's Avatar
 
Join Date: Oct 2012
Location: Pottstown, PA
Posts: 470
Damn window!

Mine doesn't whistle, but in heavy rain leaked into the cupholder and all over the console. I think it was lack of silicone just like the leak I had on the outdoor TV console that killed 2 TV's. There was hardly any silicone on the top of the outdoor box, same with the window. Waiting on rainstorm for verification.Ron.
__________________
RON & LOVER, 2013 Entegra Anthem 44SL Ebony Blaze
'13 Aluma Tilt Trailer, "WHY FLY1",Golf Cart "WHY FLY2"
BRUISER, English Mastiff, DIESEL, English Mastiff & STELLA, the Pot Bellied Pig
BUS4US is offline   Reply With Quote
Old 01-16-2014, 06:10 PM   #7
Registered User
 
Join Date: Apr 2013
Location: NV
Posts: 2,227
my concern is the lower vent par separating I had to silicone it
johnnyreno is offline   Reply With Quote
Reply

Tags
window



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ever use Fresnel lens on passenger window for right side blind spot rvtime2 MH-General Discussions & Problems 6 01-10-2014 06:17 PM
Blown window seals in a 2008 Ventana wracinti Newmar Owner's Forum 2 12-18-2013 08:10 PM
How to remove a Slide Glass Window Voyageurs Class A Motorhome Discussions 15 11-11-2013 12:01 PM
04 40' Cd 2S Driver Passenger Window Wind Noise James Sinsel Alpine Coach Owner's Forum 1 09-14-2013 07:59 PM
Passenger side window seal leaks 2000 Holiday Rambler larry106 Class A Motorhome Discussions 1 08-23-2013 08:43 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:50 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.