Passenger window

[sdesha]

This topic may have already been discussed, I would like to replace the passenger window with a window that dies not have a crank.

Any ideas?

Suzzanne
2014 Cornerstone
2015 Jeep Cherokee

[brobox]

Entegra had solid pane windows manufactured for the Classics with all of the de-lamination problems. . Call to see if they still have any in stock, or the supplier.

[sdesha]

Called parts at entegra, 2 to 3 weeks lead time, they gave me the part number and said that I could reach out to national indoor rv center for assistance. The bottom portion of the window that has a crank separated again during Zeta.

HERH is the manufacturer of the window from what parts stated

[brobox]

Best thing to do is replace it. I have that window on the new coach, it is nice. I would also call NIRVC. Tape it for a temporary fix, clear packing tape still allows light in.

[sdesha]

Thank you. I found out that LCI bought out Herh, was able to get the OEM part number for the single window, unfortunately, I did k ow know how thick the wall is, maybe 2 inches?

Going to find out how much is will cost. Entegra was a little over 700.00 and NIRVC was 903.35.

[sdesha]

For the trim ring and did not want to take the trim ring off, had some leaking around the window and door. Thought the tech fixed it.

[brobox]

Originally Posted by sdesha

Thank you. I found out that LCI bought out Herh, was able to get the OEM part number for the single window, unfortunately, I did k ow know how thick the wall is, maybe 2 inches?

Going to find out how much is will cost. Entegra was a little over 700.00 and NIRVC was 903.35.

Classics are becoming classics. That sounds like buying parts for my 62 Corvette. At that price, I would look to repair it, or take a photo of the window and see if a glass shop can rebuild it with new one piece style in your frame.

[sdesha]

Thank you

[bevandtomH]

FWIW, NIRVC quoted me $350.00 for one window about a year and a half ago. They are repairable if you are handy. I did all three small crank out windows on my 44b.
You pm me if you want.
Tom

[Dieselgem]

Originally Posted by sdesha

This topic may have already been discussed, I would like to replace the passenger window with a window that dies not have a crank.

Any ideas?

Suzzanne
2014 Cornerstone
2015 Jeep Cherokee

Entegra R\replaced mine. I am sure you could also have Paul's Rv, which is not to far from the factory handle the installation.

[Roy-c]

Try contacting Wynne Enterprises in Tuscambia Alabama. Their contact info is online. They custom make boat windows. Reasonable $, clamp ring construction so there will be no screws through the body of the RV. Have had them on our commercial boats for over 15 years, operating 12 mo/yr in New England and no issues. And they are great people to deal with. Customer oriented.
No connection, just a satisfied cust.

[sdesha]

Thank you

[C310]

Originally Posted by sdesha

This topic may have already been discussed, I would like to replace the passenger window with a window that dies not have a crank.



Any ideas?



Suzzanne

2014 Cornerstone

2015 Jeep Cherokee

Call Suncoast Design in Hudson Florida at 727-868-2773. Their window repairs are warrantied for as long as you own your coach. You can either ship the window to them or setup an appointment in their onsite campground and they will do the R&R. I’m sure you will find their turnaround time faster and price a fraction of what you’ve been quoted.
Steve

[Rollin101]

Originally Posted by C310

Call Suncoast Design in Hudson Florida at 727-868-2773. Their window repairs are warrantied for as long as you own your coach. You can either ship the window to them or setup an appointment in their onsite campground and they will do the R&R. I’m sure you will find their turnaround time faster and price a fraction of what you’ve been quoted.
Steve

X2.