Priming Your Water Pump

[royals1212]

Found a new trick to priming the water pump/unsticking the valve in the pump. Disconnect park water supply and cap water hose. Turn on pump. Turn on outside cold water lay on ground. Hook water hose to park water. Turn tank valve to fill. Hold winterization tube to hose and open valve. Park water pressure will prime the pump and unstick the valve in the pump.

Hope this helps someone.

Herb

[Gary.Jones]

Thanks Herb.... I will file that away. My pump has always managed to get the prime and start producing water, but there have been a few times I was wondering if it was ever going to get the prime....

Thanks

Gary

'