Community Forums

dclements · 07-09-2022, 08:00 AM

Good morning. It seems I have an issue with our rear camera on our ‘20 Aspire. Traveling down the road the display switches between the rear and right cameras. When I try to select the camera nothing happens, and when I put the left turn signal on it shows the rear view. Then after awhile it comes back to normal. I have turned off the 12V switch several times and it doesn’t help. Anyone have any ideas? TIA

Bobby Dowdle · 07-09-2022, 08:20 AM

Your camera switcher is going bad and needs to be replaced. One of the relays is failing and triggering the other camera. Take it to any NIRVC or your Entegra dealer for assistance with the repair.

dclements · 07-09-2022, 02:43 PM

Quote:

Originally Posted by Bobby Dowdle

Your camera switcher is going bad and needs to be replaced. One of the relays is failing and triggering the other camera. Take it to any NIRVC or your Entegra dealer for assistance with the repair.

Thanks for the quick response. Where is the camera switcher located? I am thinking it is in the utility compartment in front of the passenger chair.

rrk8091 · 07-10-2022, 05:51 AM

The rear camera goes directly to the site radio back connector and not through the video switcher. There is a fused relay in the ceiling by the kitchen fan. That is usually not the problem. The issue is a bad camera and that has to be order through the the distributor. Call Entegra for the direct parts number

brobox · 07-10-2022, 05:56 AM

Depends on the year of the coach. The camera systems have been different on almost every year Entegra. My switching is mounted in the basement, some years have been behind the TV. etc.