Rear LED slides on a Classic

[ECVB]

Did anyone figure out how to install rear slide LEDs on a classic ?
I got the DS and PS front slides LED installed thanks to previous posts. but didn't see any or could find posts on the rear slides.. Issue i see is no room to reach up there to get the panels off to pull the power cables with the tires in the way. I did see Brobox was going to attempt but did find a follow up post ?

Thanks,

[brobox]

I did do it, it wasn't worth the hassle. First time I put the slide out it cut the wire. It was going to be a lot of work for little use so I just left it at the front slides with LED's. That was the reason for no follow up post.

[ECVB]

thanks for responding .. good to know. so then i will just not do the rear slides .. I have the DS and PS front slides setup with Alexa / and Phone so they been working well .. thanks to your previous posts..

Originally Posted by brobox

I did do it, it wasn't worth the hassle. First time I put the slide out it cut the wire. It was going to be a lot of work for little use so I just left it at the front slides with LED's. That was the reason for no follow up post.

[brobox]

Interested to hear how you did the 12v slide lights to work on Alexa and phone.

[ECVB]

I picked these up

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

if you have leds already i am sure you can tap in with these

https://www.amazon.com/dp/B078NXRSHD

or any

WiFi Wireless LED Smart Controller Compatible with Alexa Google Home,Working with Android,iOS System, RGB LED Strip Lights DC 12V 24V(No Power Adapter Included)


I ran the wires same as you did , before installing sync it with your wifi via the app then have that skill install in alexa.. i have it set up with timer , voice command , and location when i am away after a certain time of day they will turn on.. I am wondering if i buy 12V alexa sensors and tap into the classic lighting system. . I have a few 110v plugs around that i have synced with alexa as well to turn on some inside lighting and tv's

Originally Posted by brobox

Interested to hear how you did the 12v slide lights to work on Alexa and phone.

[brobox]

Learned something new about LED's thank you!!

[ECVB]

your welcome

Originally Posted by brobox

Learned something new about LED's thank you!!