Reflective DOT approved side marker lights have arrived!

[rorr1821]

Just received new amber and red side marker lights with 3 wire turn signal capability. These are what is being used on 2020 units. Has the water proof quick disconnect which should make install go quickly. Have not installed but appear to be the same size as originally installed. Will provide undate after it stops raining and I do the install.

I now need to get the part number for the reflectiuve tail-turn-stop lights. I have heard they are being made by Hella but have not been successful in a finding part number.

Ray

[wade5979]

What is the part number and source for the lights

[Smitty3509]

Pictures please!

[kladner]

I bought these from Command Electronics. I will try to get pics tomorrow. They look exactly like the factory lights.

http://www.commandelectronics.com/sh...opujb4?rq=K-51

[Grower15]

Our 2016 Anthem side marker lights were changed while at the mothership. Because the old style and new lights have different hole patterns, Entegra used a decorative metal back plate to cover the old holes. This may not apply to you but I looked on line at a few 2017 Aspires for sale and they had the old style lights. I bought the marker/turn signal lights from command electronics and replaced the Entegra supplied marker lights. It’s an easy change out.

[rorr1821]

Sorry I did not include the part numbers but was waiting until I had a chance to install lights to insure all went as planned. However, as posted by someone they did come from Command Electronics. I ordered in addition to the lights and lens new chrome bezels. A very inexpensive upgrade. It sound like,from a post, those who had the Entegra light upgrade can still use these lights. Interesting.

Still looking for the stop-turn-tail round light used on the 2020. These new lights should have the DOT reflective lens. This would complete the DOT reflective requirements and eleminate the need for reflective tape.

[DeeGee]

Originally Posted by kladner

I bought these from Command Electronics. I will try to get pics tomorrow. They look exactly like the factory lights.

Interestingly, right on that page they have this:

If you have a Jayco Entegra unit and looking for a 3 wire clearance (K-51M3 or K-52M3) please call Command Electronics at (269) 679-4011 to order.

Seems like more than one ENtegra owner has contacted them...

[kladner]

Originally Posted by DeeGee

Interestingly, right on that page they have this:



If you have a Jayco Entegra unit and looking for a 3 wire clearance (K-51M3 or K-52M3) please call Command Electronics at (269) 679-4011 to order.



Seems like more than one ENtegra owner has contacted them...

Thanks for pointing that out I forgot to do that when I provided the link.