Serpentine Belt - Factoid for the record

[Tom78418]

Hey folks, just use your finger from one hand to push the pully over, the other hand to change the belt and stand on one leg while the other leg used to hang the other belts on waiting to be changed. Yep, work smarter not harder.

[Deeds]

Regarding the few comments about A/C compressors failing. Check to see where they were manufactured by looking at the sticker attached to the body of the compressor. Sanden's are manufactured in the USA, however the "Sanden Like" or Sanden Type are Chinese manufactured knockoffs. I made sure mine was USA made by Sanden when the original was replaced on our 2008 Beaver Marquis. Just some info to pass along.

[Gary.Jones]

Thanks Deeds.... never noticed. I will pay attention now.

Gary

[lwmcguire]

I use a serpentine belt tool that has the 6 inch off set that is very handy

Breaker or tool , good advice from the OP