Side Security light bulb replacment

[NowGo]

I would like to change the bulbs to LED in the security lights on both sides of a 2014 Anthem (I am assuming they are incandescent bulbs. I also want to clean the lenses.

Has anyone had these lenses off, and how do the come off? I see no screws and before I start to pry them off I thought I would check in here, don't need to break a lense or a holding tab.

Thanks in advance for any advice!

[Oldguy2013]

If the same as mine, There are two taps on top and bottom of the lens that fit into the molding. You can pinch the lens by placing your fingers at the top and bottom of the lens or you can use a flat head screw driver and very gently pry the lens up and away from the molding. I have flat LED lights in mine and they are brighter then the original bulbs. As for cleaning and trying to get the yellow out I have used Mothers Chrome Polish to help brighten the lens up.

[bevandtomH]

Our security lights varied with production but do come off as OldGuy describes.
As for cleaning the lens, I didn’t want to spend a lot.
Very happy with results from a Turtle Wax Lens Cleaner Kit. Available from auto parts or hardware stores.
So much so, I left the old lights in and will wait to change them out to LED’s.