Since most Entegras come with in motion

[ranbev]

satellite is the wiring the same if I have dealer switch out the in motion for the Winegard Traveler?

[Ann n Gene]

Yes I think so. I had mine changed out(2013 Anthem) and they had everything except the data cable that had to be pulled from the control box for the traveler up to the dish.

[brobox]

On the newer model years, Entegra pre-wired for the Traveler. If the Traveler was an option when it was built check and see if the wiring is in the entertainment center. There was post by TXBart about that a while back and he had a picture of the Traveler pre-wire asking what it was.

If you are lucky the dealer won't have to pull any new wires which will make for a very easy install. the cables going to the rest of the TV's should all be the same.

[DSL417]

And for older models, you can take the two feeds going into the In Motion and run them into the satellite feeds for the Traveler. Did have to run another power feed, which we chose to run into the bedroom closet.

Using this approach, we can switch back and forth between the In Motion and the Traveler.

[Bill in FL]

Here are some diagrams I got from Entegra regarding the wiring for the audio/visual systems. Hope I got the attachment thing correct. If not, I will try it again.

[TerryO]

Originally Posted by Bill in FL

Here are some diagrams I got from Entegra regarding the wiring for the audio/visual systems. Hope I got the attachment thing correct. If not, I will try it again.

Yep, please try again, it's not there.

[MRUSA14]

Originally Posted by Bill in FL

Here are some diagrams I got from Entegra regarding the wiring for the audio/visual systems. Hope I got the attachment thing correct. If not, I will try it again.

Thank you. I got the attachments just fine.