Slide Out Mortor Bolts

[Balladeer]

Having researched some old posts, I checked out all of my slide motor bolts. All four motors had various stages of looseness. The worst was the forward driver side motor. All four bolts were loose with two of them backed out about 3/4 of an inch. It was a simple matter to tighten all but the vanity motor. This required accessing the motor through the cover plate above the right side drivers.
The whole process took only about an hour but I believe prevented some serious damage down the road.
It is things like this that this forum is very worth while.

Best regards...The Balladeer