|
|
09-18-2018, 03:11 PM
|
#43
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Quote:
Originally Posted by 757driver
For what you can set there will be a few small changes. By the way can you confirm that it is Relion AGM batteries that you have?
|
Will do Don.
Something else I learned with the system today that may help other that store on 120v.
Set shore power to the number of amp service. Default is 30, which could blow the shower power circuit breaker. If set to 5 amps like the Magnum, you will only get 5 amps to the MH. One A/C will not run or the battery charges if needed. My refrigerator draws 3 amps, so there is more than 1/2 of the allowed power being used. More of the learning curve.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
09-19-2018, 02:38 PM
|
#44
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Quote:
Originally Posted by 757driver
For what you can set there will be a few small changes. By the way can you confirm that it is Relion AGM batteries that you have?
|
Don, here is the screen photo of the factory settings, except the amp setting which I lowered to my shore power amps. You were correct about the "not charging" until the battery voltage drops....strange it is setup that way. Also surprised the float setting and Absorb settings are the same. The batteries are the Relion 400 amp AGM's Thanks for your assistance again.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
09-19-2018, 04:02 PM
|
#45
|
Senior Member
Entegra Owners Club
Join Date: Jun 2004
Location: Bayfield, Ontario
Posts: 5,470
|
Quote:
Originally Posted by brobox
Don, here is the screen photo of the factory settings, except the amp setting which I lowered to my shore power amps. You were correct about the "not charging" until the battery voltage drops....strange it is setup that way. Also surprised the float setting and Absorb settings are the same. The batteries are the Relion 400 amp AGM's Thanks for your assistance again.
|
Chuck,
A pm is on the way with the settings.
__________________
Don & Gerri
2014 Entegra Anthem 44B
2014 Honda CRV Touring
1300W Solar, 1200AH LiFePO4 FMCA F443497
|
|
|
09-19-2018, 04:16 PM
|
#46
|
Senior Member
Entegra Owners Club
Join Date: Jun 2004
Location: Bayfield, Ontario
Posts: 5,470
|
Quote:
Originally Posted by brobox
Don, here is the screen photo of the factory settings, except the amp setting which I lowered to my shore power amps. You were correct about the "not charging" until the battery voltage drops....strange it is setup that way. Also surprised the float setting and Absorb settings are the same. The batteries are the Relion 400 amp AGM's Thanks for your assistance again.
|
By the way your Float volts are set way too high. Should be 13.5v.
__________________
Don & Gerri
2014 Entegra Anthem 44B
2014 Honda CRV Touring
1300W Solar, 1200AH LiFePO4 FMCA F443497
|
|
|
09-19-2018, 04:26 PM
|
#47
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Quote:
Originally Posted by 757driver
By the way your Float volts are set way too high. Should be 13.5v.
|
Got the PM, thank you. I also thought the float was off with it set to the same as absorb. After the Anthem, and what we found I question the factory settings, thanks to you.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
09-19-2018, 04:58 PM
|
#48
|
Senior Member
Entegra Owners Club
Join Date: Jun 2004
Location: Bayfield, Ontario
Posts: 5,470
|
Quote:
Originally Posted by brobox
Got the PM, thank you. I also thought the float was off with it set to the same as absorb. After the Anthem, and what we found I question the factory settings, thanks to you.
|
That was not a factory setting. Entegra sets Float at 13.2v for the 2019 which according to Relion is a little too low. Someone was playing with your settings and got it messed up.
__________________
Don & Gerri
2014 Entegra Anthem 44B
2014 Honda CRV Touring
1300W Solar, 1200AH LiFePO4 FMCA F443497
|
|
|
09-19-2018, 05:32 PM
|
#49
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
UPDATE on my experience:
The G8 Vega Touch screen up date is a good one. The VT screen is now stable and not showing different readings every 5 minutes for voltage, battery charge, etc. The mobile app is now synced with VT. I am no longer showing power source as "inverter" when the inverters are turned off. The battery voltage is now the same as the VT reading.
If you have the !G8 updated needed message...it is needed, nice improvement.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
09-19-2018, 06:10 PM
|
#50
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Aug 2017
Location: Mission, TX
Posts: 344
|
Brobox,
Can you advise if I am able to view this Inverter dashboard with my Ipad App on my 2015 CS? I am confused between vegatouch and crestron. I paid the $99 to access my curtains, lighting etc, but have not seen this dashboard?
Thanks!
Bill
__________________
Bill & Marcia
|
|
|
09-19-2018, 06:26 PM
|
#51
|
Senior Member
Join Date: Oct 2012
Location: Louisiana
Posts: 11,537
|
Bill
I can give you a partial answer. The 2019 Cornerstone I own (and I assume several other of the models) have a completely new software package running the VegaTouch. The new software was written by FireFly software engineers and incorporated into the 2019 unit. The Firefly software used before 2019 used what I know as the "Crestron core" code. My understanding, which may be somewhat inaccurate, is that the Crestron core was limiting certain things that could be or could not be done, and so new software was written. I could download iPhone and iPad software called Nebula software from Firefly for $15.00 from the Apple Store, whereas the Crestron core software was more like $200.
My understanding is that the Nebula software is only appropriate for the 2019 new program.
That's all I know.
Gary
__________________
Gary and Dee, Zowie and Bowie (traveling cat sibs)
2019 Cornerstone 45B, X15-605hp, Imperial, Spartan K3,
2013 Honda CR-V toad, Demco Excali-Bar II,
Demco Baseplate, Demco Toad Light system, 73 de W5FI
|
|
|
09-19-2018, 06:29 PM
|
#52
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Sorry, I have no knowledge of the previous ipad upgrade. It came out a year after my 14, maybe the same year. It was a $5,000 option that not many purchased. I am just now learning the new Vega Touch.
I would give Firefly a call on that 574-825-4600 if you have paid for the app.
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
|
|
|
09-19-2018, 06:33 PM
|
#53
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Aug 2017
Location: Mission, TX
Posts: 344
|
Thanks Guys! Looks like it is time to call Firefly!
__________________
Bill & Marcia
|
|
|
09-19-2018, 08:21 PM
|
#54
|
Senior Member
Entegra Owners Club
Join Date: Oct 2009
Posts: 2,193
|
Gary has it right as usual.
__________________
Cheryl and Emerson missing Rascal but loving our new buddy, Winston
Sadly Coachless
|
|
|
09-20-2018, 09:33 AM
|
#55
|
Senior Member
Join Date: Aug 2016
Location: Scottsdale, AZ
Posts: 3,122
|
Quote:
Originally Posted by 757driver
That was not a factory setting. Entegra sets Float at 13.2v for the 2019 which according to Relion is a little too low. Someone was playing with your settings and got it messed up.
|
Don is right, as usual. Relion recommends Float voltage of 13.8.
More info in this thread I just posted:
http://www.irv2.com/forums/f278/reco...ks-411944.html
__________________
Larry & Amy Beckner
Scottsdale, AZ
2022 Newmar Super Star 4061
|
|
|
09-20-2018, 10:52 AM
|
#56
|
Senior Member
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 31,735
|
Quote:
Originally Posted by 757driver
That was not a factory setting. Entegra sets Float at 13.2v for the 2019 which according to Relion is a little too low. Someone was playing with your settings and got it messed up.
|
Thanks Don I on my way to correct the settings now. The mobile app is showing 13v now a first since the G8 was updated.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|