Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Entegra Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 06-21-2021, 12:06 PM   #1
Member
 
Join Date: Aug 2011
Posts: 76
SuperSlide Clicking noise

2018 Anthem 44 B

Our Super Slide out is making a clicking noise when it operates....Slide is operating correctly but making a constant new clicking noise.

Motor ? Or Cog/ Bearings?

Anyone have this noise or problem.....

Thank you for your help

Steve and Daphne Stanford
Xpress21 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-21-2021, 12:30 PM   #2
Senior Member
 
garysfb's Avatar


 
Entegra Owners Club
Join Date: May 2019
Posts: 760
Are you seeing small, bb size, ball bearings in the front of your passenger bay with the drawer? Ours made that noise and was a little rough going out and in. We were at Entegra for our AIM and they had the company that makes the slide mechanisms come out and fix the problem. Replaced the motor assembly and adjusted the slide.
__________________
Gary and Phyllis Small
2018 Anthem 44F
2019 Jeep Wrangler Unlimited - Sahara
2003 Alegro Bus (sold)
garysfb is offline   Reply With Quote
Old 06-21-2021, 01:00 PM   #3
Senior Member
 
brobox's Avatar
 
Entegra Owners Club
Join Date: Apr 2007
Location: SW FL
Posts: 25,507
Another thing to check is that the slide motor bolts are tight. The motor will make noise if it is loose
__________________
Chuck in SW FL
Digital 2021 Cornerstone "B"
A "Digital" 2019 Cornerstone "B" Traded
A "Classic" 2014 Anthem 42 RBQ---Sold
brobox is online now   Reply With Quote
Old 06-21-2021, 02:20 PM   #4
Member
 
Join Date: Aug 2011
Posts: 76
Quote:
Originally Posted by brobox View Post
Another thing to check is that the slide motor bolts are tight. The motor will make noise if it is loose
We check and tighten if loose slide out motors after every trip. Thank you so much for your help!
Xpress21 is offline   Reply With Quote
Old 06-21-2021, 02:30 PM   #5
Member
 
Join Date: Aug 2011
Posts: 76
Quote:
Originally Posted by garysfb View Post
Are you seeing small, bb size, ball bearings in the front of your passenger bay with the drawer? Ours made that noise and was a little rough going out and in. We were at Entegra for our AIM and they had the company that makes the slide mechanisms come out and fix the problem. Replaced the motor assembly and adjusted the slide.
Havenít seen any bb size things dropped.. we will check SuperSlide bay or in front of slide out too.

Clicking Sound while slide is being moved sounds as if it is coming from slide motor area.

We have ordered from parts new motor and cog items JIC... hoping motor will be the fix

Thank you for all your help,
Steve and Daphne
Xpress21 is offline   Reply With Quote
Old 06-22-2021, 08:57 PM   #6
Senior Member
 
Join Date: Dec 2015
Location: Jasper, FL
Posts: 352
Sounds like a bad motor. I had the same symptoms and it was the motor. They use Stainless and Nylon gears. Not a good mix.
__________________
2015 Anthem 42 RBQ
2008 Jeep Wrangler JK
Cutch is offline   Reply With Quote
Old 06-23-2021, 11:47 AM   #7
Member
 
Join Date: Aug 2011
Posts: 76
Quote:
Originally Posted by Cutch View Post
Sounds like a bad motor. I had the same symptoms and it was the motor. They use Stainless and Nylon gears. Not a good mix.
Hoping the new motor we ordered will be the fix.

Thank you so much for letting us know!
Xpress21 is offline   Reply With Quote
Reply

Tags
noise, slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2008 Fleetwood Providence Superslide help??? Daddy G Fleetwood Owner's Forum 4 08-17-2016 07:33 AM
Pullrite Superslide Hitch Problem cidefehr Trailer Towing and Tow Vehicles Discussion 2 08-17-2015 01:47 AM
Fleetwood Terry 31' superslide wont work JTWIT Travel Trailer Discussion 1 06-03-2013 12:34 PM
Kwikee Superslide II installation Jimwo Newmar Owner's Forum 1 12-28-2011 09:13 PM
Kwikee SuperSlide I & SuperSlide II TechWriter MH-General Discussions & Problems 1 08-16-2010 10:45 PM


All times are GMT -6. The time now is 01:23 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.