Swinging Fridge doors no more

[MRUSA14]

Originally Posted by voltdoc

That doesn't help the freezer which is the main issue we have. We've tried looping similar straps around the three handles but pulling upward on the freezer handle invokes a mechanism to force the door open, so the strap is actually somewhat counterproductive. While it prevents major disaster it will still let the doors open enough to be a problem.

Different fixes for different fridges. Our fridge has only two doors side by side, no bottom freezer drawer.

[RubiconTrail]

Samsung RF23HCED in the Cornerstone. We've had the Fridge Fixer "Gen 2 Long A" model for several months and several thousand miles, works very well and stores stuck to the front of the microwave when not in use.

Very ingenious small manufacturing!

John

[757driver]

Originally Posted by voltdoc

Happy Thanksgiving!

For those with the Samsung RF23HCEDBSR fridge that was factory installed in many Entegra's from about 2014 thru 2017, there is a newer model of the Fridge Fixer that is an adhesive design and super simple to install. Also it does not interfere with the freezer light on the bottom of the left fridge door.

https://www.amazon.com/Fridge-Fixer-...990649&sr=8-11

We have had it installed for a couple thousand miles so far and been on some very bumpy roads and it is working perfectly. Holds all three doors firmly, is unobtrusive and is very easy to lock and unlock. It also has a "prop open" slot for when the RV is in storage and the fridge is shut off.

More photos on my blog site: https://myquantumdiscovery.com/fridg...e-doors-closed

Rob,

That model that you mentioned is slightly different than ours, we have an RFG237AARS. Most likely the critical measurement is the depth of the fridge doors. Can you measure yours to see if this model would work for our fridge? The adhesive method seems less obtrusive than the metal bar across to the hinges.

[voltdoc]

Originally Posted by 757driver

Rob,

That model that you mentioned is slightly different than ours, we have an RFG237AARS. Most likely the critical measurement is the depth of the fridge doors. Can you measure yours to see if this model would work for our fridge? The adhesive method seems less obtrusive than the metal bar across to the hinges.

Don, the depth of the doors on the RF23HDEC is 4.5" (11.4cm).

See photo here: https://photos.app.goo.gl/WeRSeVDrvqoTD5eVA

Strongly suggest you contact Carl at recubed solutions, he should be able to set you up with the exact item you need. Email is orders@recubed.solutions

Let me know if you need more photos or other info. Hope all is well with you all.

[757driver]

Rob,

Thanks for that. Ours is 3 and 7/8” deep so we will have to find another solution. Have sent an inquiry to recubed.

[Fattman-Litlboy]

Originally Posted by 757driver

Rob,

Thanks for that. Ours is 3 and 7/8” deep so we will have to find another solution. Have sent an inquiry to recubed.

I just sent them a request for mine also measuring 3-7/8".
Thanks,
Jim

[philnail]

Attachment 1Attachment 1

We built our own several years ago out of a door hinge and 1 1/2” aluminum angle

It took about 30 minutes to make and has worked perfectly

[757driver]

After several talks and pictures back and forth with Carl at https://www.recubed.solutions/ there is now a working adhesive mount model for the Samsung fridge model RFG237AARS that is in the older Entegra’s.

What a fantastic piece of engineering that is simple, unobtrusive, and best of all, works as advertised!!!

[jobobjet]

757D,

How do you order from this company ? Amazon has no stock on the version I need RF23H... and recubed's web site flow ends with the installation instructions page.

[757driver]

Originally Posted by jobobjet

757D,

How do you order from this company ? Amazon has no stock on the version I need RF23H... and recubed's web site flow ends with the installation instructions page.

Click on the “Talk to us” tab and email Carl directly, he is quick to respond.

[757driver]

Originally Posted by Fattman-Litlboy

I just sent them a request for mine also measuring 3-7/8".
Thanks,
JimAttachment 268260

Jim,

Have you received your Fridge Fixer yet? If so did you have a small protrusion of plastic on the left fridge door at the bottom that needed to be trimmed off to complete the install?

[jobobjet]

Thank you.