|
A common problem with tank level indications is that one of the two sensors comes unglued from the tank and falls off and shows empty all the time. If a simple electrical reboot doesn't fix the problem, remove the plywood shield that protects the side of the tank and see if both sensors are still glued on. That problem occurred with my 15 Anthem.
Gary
__________________
Gary and Dee, Zowie and Bowie (traveling cat sibs)
2019 Cornerstone 45B, X15-605hp, Imperial, Spartan K3,
2013 Honda CR-V toad, Demco Excali-Bar II,
Demco Baseplate, Demco Toad Light system, 73 de W5FI
|
Linear Mode
