Community Forums

dusty56 · 07-29-2014, 05:04 PM

Tonyd51, I used the existing hose that went from the hose reel to the fresh water input. I think that is what you see behind the reel. I then connected it to 1/2 pvc. Ace Hardware had all the fittings including the one way valve. They also had the brass 3/4 inch hose fitting to the 1/2 threaded 90 degree elbow. Water pressure is great, works out fine.

Tonyd51 · 07-29-2014, 07:08 PM

Thank you. I plan on doing the mod tomorrow

WDE · 07-30-2014, 09:15 AM

Quote:

Originally Posted by Fasteddie08

New TV Bracket. After receiving a new TV from customer service because of a little defect, I decided to install a new bracket. I didn't put a lot of time and effort into it. It actually mounted up to the three bolt holes that are already there from the OEM bracket. It's not a perfect fit. It sticks out a little bit farther then the original, so when you close the overhead door it kind of pushes against it very slightly and because I decided not to drill three new holes but rather use the existing mounting holes that were there, it's off-center by about an inch. So far we like it. We figured would give it try, easy enough to go back to the original bracket or switch yo something new down the road. Attachment 69083 Attachment 69084 Attachment 69085 Attachment 69086 Attachment 69087 Attachment 69088

Did I miss the info on the bracket you used? This is great and eager to get this done on my coach before football/tailgate season. If you could provide this info, it would be appreciated ...

Fasteddie08 · 07-30-2014, 12:23 PM

Sure. I will get that to you later today.

brobox · 07-30-2014, 12:26 PM

Quote:

Originally Posted by Fasteddie08

Sure. I will get that to you later today.

I have also been hoping you would post it, thanks.

Fasteddie08 · 07-30-2014, 12:37 PM

Funny, it didn't get a lot of comments. So I figured no one was interested.

WDE · 07-30-2014, 02:27 PM

Quote:

Originally Posted by Fasteddie08

Funny, it didn't get a lot of comments. So I figured no one was interested.

I figured you were so "fast" I missed your reply

After all the commentary on the outside TV, your mod was welcome news. I've been looking at thinner TVs that would accept the Displays2go bracket. Interesting, my search for thinner 40" LED led me to learn that manufacturers appear to be moving away from that size ... many more 42"s in the product lines.

WDE · 07-30-2014, 02:39 PM

A couple of days ago, I posted a few photos of the "slide-out boxes" I was working on with Summit Products and promised photos once they were installed. Well here they are ... I am very, very pleased. Great engineering ... very strong ... light weight and, my opinion, look great.

I didn't take time to organize and put all "my stuff" back in the trays! Wanted to get you guys the photos as quickly as possible.

If you are interested in purchasing these, phone Kelly at Summit Stainless. (515) 252-0435

hogdriver · 07-30-2014, 02:44 PM

How much do they cost?

WDE · 07-30-2014, 03:04 PM

Quote:

Originally Posted by hogdriver

How much do they cost?

Dave - I realize how stupid this is going to sound. But here goes ... I don't know how much they cost. I haven't paid for them yet. When I was at Summit, I told Albert what I wanted and he got out the tape and started measuring and drawing. He is so incredibly reasonable with his pricing that I never asked the price. I said make them and we will figure out the price later. He "owes" me an invoice.

I got one for the factory installed tray and a second for the tray I installed in the next compartment on the 44B.

Fasteddie08 · 07-30-2014, 03:07 PM

Here is the bracket I bought and installed. We really like it.

http://www.wallmountworld.com/Ultra-...rim-art-42.htm.

I want to say again that this bracket did match up to the three (6mm) self tapping screws holes from the OEM bracket on my coach, and I did not spend a lot of time with the install, about 20 minutes. I did drilled out the 6mm to 1/4 inch and used 1/4-20 hardened bolts and added some back support, but I don't think it needs it. . However it is off centered by about an inch and a half, but it doesn't bother us at all. And it does stick out a slight amount but the door still shuts easy. The OEM TV is at least 3-1/4 inches thick. If you can find a thinner one you will not have this problem. You can mount the bracket to the right or the left side I just chose the right side because I was standing closer to it at the time. LOL!

Attachment 69401 Attachment 69402 Attachment 69403 Attachment 69404 Attachment 69405 Attachment 69406

WDE · 07-30-2014, 03:18 PM

Thanks. Just ordered the bracket.

brobox · 07-30-2014, 03:22 PM

Thanks Eddie. Nice, will do the job mod, without a lot of work. Thanks for sharing. Not everyone comments (like me) as I don't want to see the mods get lost in the responding posts, even though the ideas are GREATLY appreciated. Thank you for sharing.

Fasteddie08 · 07-30-2014, 03:34 PM

I would say good luck, but it is so easy it install you will not need it. One more small thing, after you install it, when you go to pull the TV out you will always have to pull the side opposite the bracket first then it'll slide out , because it is off centered if you try to pull it straight out it'll hit bracket on the door. A slight clearance issue, which again doesn't bother us. Then of course you have to reverse the process when you go push it back in.